I have 2 GIGABYTE builds:
1) GIGABYTE GA-A75M-D2H FM1 AMD A75 (Hudson D3)
2) GIGABYTE GA-MA790GP-DS4H AM2+/AM2 AMD 790GX
#1 uses the APU integrated graphics and #2 uses a ATI-4770 graphics card.
I have 2 Monitors:
ACER AL2216W
- works using DVI-D & HDMI (with adapter) with #2 but not with #1 (says no signal)
- VGA with #1 works and I have been using this so far ( don' care for VGA with #2)
HANNSspree HF229H
- works with the HDMI socket for both #1 & #2 ( don' care for VGA with #1 & #2)
Ultimate aim is to get the AL226W working with DVI-D.
Why is this happening? Any of the experts here can provide me with any answers/clues/suggestions etc, please.
1) GIGABYTE GA-A75M-D2H FM1 AMD A75 (Hudson D3)
2) GIGABYTE GA-MA790GP-DS4H AM2+/AM2 AMD 790GX
#1 uses the APU integrated graphics and #2 uses a ATI-4770 graphics card.
I have 2 Monitors:
ACER AL2216W
- works using DVI-D & HDMI (with adapter) with #2 but not with #1 (says no signal)
- VGA with #1 works and I have been using this so far ( don' care for VGA with #2)
HANNSspree HF229H
- works with the HDMI socket for both #1 & #2 ( don' care for VGA with #1 & #2)
Ultimate aim is to get the AL226W working with DVI-D.
Why is this happening? Any of the experts here can provide me with any answers/clues/suggestions etc, please.