Question Fresh Install, not enough free resources DVD/Bluray Drive (Code 12)

[bunnyboy21]

So I installed Windows 7 to my 1TB SSD last night, got it all up and running with drivers and stuffs then noticed my DVD/Bluray drive was missing. I used the device manager to scan for hardware changes, Windows Update would pop up for a moment, try to install the driver for the Standard Dual Channel PCI IDE Controller but fail.

There would be the Warning (Yellow Triangle) symbol next to it, I would go to the properties and it would show this:

So I decided to unplug the SATA and power cord, swap them for a different one, unplug my BluRay drive, plug it back in after making physical adjustments. I reboot and it's working, then an hour or two later after rebooting again for new updates it did the same damn thing.

I have no idea what is going on, I really want to continue using Seven, but damn this is really annoying. I've had this problem before with Seven. It's non existent on 10.

My Specs are:

EVGA GTX 980TI 6GB
i7 6700K
16GB DDR4
1TB Samsung SSD (Not an M.2)

Not sure how much this will help but:

 

[alceryes]

What's the mfg/model of your motherboard?
It may not officially support Windows 7.

 

[bunnyboy21]

ASRock Z170 Extreme7+ LGA 1151 Intel Z170 HDMI SATA 6Gb/s USB 3.1 USB 3.0 ATX Intel Motherboard

It supports it, someone on Seven forums said something about checking dma.irq

But I've never heard of that before.

 

[onespeedbiker]

Are you using the latest ASRock INF driver? https://www.asrock.com/MB/Intel/Z170 Extreme7+/index.asp#Download

 

[bunnyboy21]

Are you using the latest ASRock INF driver? https://www.asrock.com/MB/Intel/Z170 Extreme7+/index.asp#Download

I just downloaded it, rebooted and still the same. Someone told me to go to resources on Device Manager on the Standard Dual Channel PCI IDE Controller to look for dma.irq but it just shows this:

 

[bunnyboy21]

I shut down, unplugged and replugged the cables from my BluRay/DVD drive and swapped out a cable to the SSD. It seems to be working now, however I am pretty sure the last time I rebooted/updated windows it messed up again. I am unsure, but as of now it is currently working. Will re-open thread if it stops.

 

[Mtop]

Is the update causing this problem?
find out which update by selectively uninstalling each individule update one at a time.