GA-K8NXP-SLI need Help

Toggle sidebar Toggle sidebar
G

Guest

Guest
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

🙁 Hi,can any body tell me where i can get the optional 3 port IEEE
1394b Cable which attaches to the mother board, as it says in the
manual you should contact your local dealer for it but i have had no
luck
I live in the U.K. if that helps :shock:
Thanks
Karl :roll:
 
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

karl007eagle wrote:
> 🙁 Hi,can any body tell me where i can get the optional 3 port IEEE
> 1394b Cable which attaches to the mother board, as it says in the
> manual you should contact your local dealer for it but i have had no
> luck
> I live in the U.K. if that helps :shock:
> Thanks
> Karl :roll:


Try contacting the Gigabyte's UK office. Their US office has them
($18US), perhaps the UK office does as well.


Also, they aren't 3 port 1394b L-brackets - they only have (2)1394b
ports and (1) USB2.0 port. If you need to run a 3rd 1394b port, you'll
either have to get a second bracket from Gigabyte, or try contacting
Granite Digital:

http://www.granitedigital.com/catalog/pg18b_firewirecables.htm


I'll warn you though, be careful if you get a 1394B PCI slot L-bracket
from Granite Digital -- check the pinout wiring carefully against the
pinout listed in your mobo manual, and rewire it if needed before you
plug it in, or like a miswired USB header connector, or you could fry
your mobo and PSU.

Or, optionally, you could go with a dual port L-bracket out the back
*and* a 3.5"/5.25" I/O bay for a front accessable ports (connected
to the mobo's 3rd 1394B header). GoGoCity.com has such a unit that
has bilingual 1394b ports, and a 4 port USB2.0 hub in a bay which fits
in either a 3.5" drive bay, or a 5.25" bay. http://tinyurl.com/dhrpe



-Rick
 
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

karl007eagle wrote:
> 🙁 Hi,can any body tell me where i can get the optional 3 port IEEE
> 1394b Cable which attaches to the mother board, as it says in the
> manual you should contact your local dealer for it but i have had no
> luck
> I live in the U.K. if that helps :shock:
> Thanks
> Karl :roll:
>

A couple of other links I dug up:

http://www.kouwell.com.tw/pr-m2.htm

http://www.winbest.com.tw/7030bi.htm
 
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

Hi Nick, Gigabyte U.K dont have any and my manual says that its a 3
port back plate and has 3 wires coming off it and then it attachers
to the motherboard with one connector, the board comes with 10 usb
ports and i have all of them with the board so if this has a usb port
on it then its not the one ,Gigabyte do supply you with a back plate
which has 2 usb on it and also IEEE ports which connects to the 16
pin header, but the back plate i am after has 3 IEEE1394b ports which
are 800 not 400 transfer speed and the connector has pin 7 missing
and not pin 9 as i can get the plate with pin 9 missing but it does
not fit as it is wired up wrong .Also this board only has 2 IEEE 1394
headers on it not 3 which are called F1_1394 andF2_1394 and the F1 is
the10 pin header with pin #7 missing
 
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

karl007eagle wrote:
> Hi Nick, Gigabyte U.K dont have any and my manual says that its a 3
> port back plate and has 3 wires coming off it and then it attachers
> to the motherboard with one connector, the board comes with 10 usb
> ports and i have all of them with the board so if this has a usb port
> on it then its not the one ,Gigabyte do supply you with a back plate
> which has 2 usb on it and also IEEE ports which connects to the 16
> pin header, but the back plate i am after has 3 IEEE1394b ports which
> are 800 not 400 transfer speed and the connector has pin 7 missing
> and not pin 9 as i can get the plate with pin 9 missing but it does
> not fit as it is wired up wrong .Also this board only has 2 IEEE 1394
> headers on it not 3 which are called F1_1394 andF2_1394 and the F1 is
> the10 pin header with pin #7 missing

Hi - I can help. I have a spare Gigabyte bracket. Reply and we'll sort out
your address via email and a nominal fee for the part/postage.

Ian.
 
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

"Ian" <ian@nospam.net> wrote in message
news:42739d11_3@mk-nntp-1.news.uk.worldonline.com...

> Hi - I can help. I have a spare Gigabyte bracket. Reply and we'll sort out
> your address via email and a nominal fee for the part/postage.
>
> Ian.
>
>

I want it!!...will pay more!!

richarddower@hotmail.com
 
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

Richard Dower wrote:
> "Ian" <ian@nospam.net> wrote in message
> news:42739d11_3@mk-nntp-1.news.uk.worldonline.com...
>
>> Hi - I can help. I have a spare Gigabyte bracket. Reply and we'll
>> sort out your address via email and a nominal fee for the
>> part/postage.
>>
>> Ian.
>>
>>
>
> I want it!!...will pay more!!
>
> richarddower@hotmail.com

Don't fight over me boys! :)

I have a genuine part from Gigabyte. It came with my now deceased (sadly!)
7VAXP. It's a triple-header, so that's three i-link/1394 ports on a
bracket, to three header plugs. mailto:ioxley33@hotmail.com, address or
whatever and I'll probably let the thing go for a fiver or so, cause I'm a
good bloke and I just want some of the clutter cleared from my spares box.
The header is in perfect condition, by the way. I'm happy to part with it
cause I'd now use a PCI card anyways.

Ian.
 
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

Ian wrote:
> Richard Dower wrote:
>> "Ian" <ian@nospam.net> wrote in message
>> news:42739d11_3@mk-nntp-1.news.uk.worldonline.com...
>>
>>> Hi - I can help. I have a spare Gigabyte bracket. Reply and we'll
>>> sort out your address via email and a nominal fee for the
>>> part/postage.
>>>
>>> Ian.
>>>
>>>
>>
>> I want it!!...will pay more!!
>>
>> richarddower@hotmail.com
>
> Don't fight over me boys! :)
>
> I have a genuine part from Gigabyte. It came with my now deceased
> (sadly!) 7VAXP. It's a triple-header, so that's three i-link/1394
> ports on a bracket, to three header plugs.
> mailto:ioxley33@hotmail.com, address or whatever and I'll probably
> let the thing go for a fiver or so, cause I'm a good bloke and I just
> want some of the clutter cleared from my spares box. The header is in
> perfect condition, by the way. I'm happy to part with it cause I'd
> now use a PCI card anyways.
>
> Ian.

Actually I just lost my job so that'll be fifty quid, ha ha ha ha. No, no, I
am kidding. Just one of my jokes. I did lose my job though. ah heck.
 
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

:roll: Hi Ian is the Bracket still up for grabs and if not can you
tell me where you got it from or post a link :?:
Best regards
Karl :?
 
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

karl007eagle wrote:
>> roll: Hi Ian is the Bracket still up for grabs and if not can you
> tell me where you got it from or post a link :?:
> Best regards
> Karl :?

Karl - see my post (above) "Firewire Bracket Clarity"

Cheers.
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom