I am upgrading my integrated graphics to an NVidia GTX 1060 3GB, but after inserting it into the motherboard and powering up, all I get is a black screen. Here are my specs:
Motherboard-Gateway DX4885
OS-Windows 10 Home x64
Processor-Intel Core i7-4770 @3.40 GHz
RAM-12 GB
PSU-Corsair CX650
With everything connected, the fans on the GPU run, so there is power to the GPU. When I disconnect the HDMI from the GPU and reconnect to the integrated graphics connector, I still get a black screen. Only when I pull the card can I get back to a visible display. I could not find an option in the BIOS to disable or change the graphics controller. I could not find a BIOS update from the manufacturer either. How can I tell if the mobo is incompatible with the GPU? Any suggestions on how to get the display to appear?
Motherboard-Gateway DX4885
OS-Windows 10 Home x64
Processor-Intel Core i7-4770 @3.40 GHz
RAM-12 GB
PSU-Corsair CX650
With everything connected, the fans on the GPU run, so there is power to the GPU. When I disconnect the HDMI from the GPU and reconnect to the integrated graphics connector, I still get a black screen. Only when I pull the card can I get back to a visible display. I could not find an option in the BIOS to disable or change the graphics controller. I could not find a BIOS update from the manufacturer either. How can I tell if the mobo is incompatible with the GPU? Any suggestions on how to get the display to appear?