Question (Solved) Is the 2-fan Palit 1060 Super Jetstream compatible with a PNY 1080 Ti Blower?

[Zombu]

Hi guys, sorry for bad English.
I have two graphics cards as in the title:
A 2-fan Palit 1060 SuperJetstream and a PNY 1080 Ti Blower.

Unfortunately the Palit 1060 is dead and I would like to know if it is possible to transfer the reference cooling from it to my PNY 1080 Ti, since the original cooling system cannot cope even at undervolt. I would be grateful for your answers.

 

[Zombu]

Hi, i want to change stock turbo cooling system due to high noise and high temperatures even under undervolt. People who have had similar experiences, what advice can you give me? I would be grateful!

 

[Lutfij]

Welcome to the forums, newcomer!

First off, both cards don't have the same TDP off their chips. Second, the PCB's are not the same so you can/will/might run into clearance issues;
https://www.techpowerup.com/review/palit-geforce-gtx-1060-super-jetstream/3.html

List of compatible water blocks | PNY GeForce GTX 1080 Ti Blower Edition 11GB GDDR5X (VCGGTX1080T11PB-CG2) | Liquid cooling compatibility list | EKWB

Third, you have both cards in hand, I'd ask you to disassemble both cards, track their screws and then see if you run into any clearance issues.

IMHO, replace the GTX1080Ti's cooler with something aftermarket akin to this reddit. I would suggest the Accellero IV by Arctic but they can only be found off Ebay, at this moment of time since they're EoL.

Out curiosity, what is;
The make and model of your case?
Number of fans and their orientation in said case?
Ambient room air temps?
What sort of an undervolt have you applied on the GPU?

 

[Zombu]

Thanks for the feedback, I have already disassembled both cards and realized that they are incompatible, so it’s time to close this post.
I really appreciate the link to Reddit and will take a closer look at the cooling options described there.

Answering your questions))
Case - 1stplayer Trilobite T7-P white.
6 fans in total - 3 front to inside,
1 at the back and 2 at the top to blow hot air out.

I can’t say the exact room temperature, but something around 20 degrees.
I set everything up in MSI Afterburner. The video card is running on 0.875V at 1860 MHz. Memory +500 MHz, everything is stable. I also adjusted the fan operation, at 75-80% rpm the video card stays around 70-75 degrees, but it makes a lot of noise.