I'm not sure what to do now. I updated my Bios with a 1300x to v f42a. Everything was fine. I replaced the cpu and cooler, got everything plugged in right, but when u turned on my PC I just got a black screen. Sometimes is says no connection. Fans are spinning rgb and led is lighting up. I am really not sure what to do here and could use some help.
-
You heard it here first: Black Friday 2024 has arrived!
If you still have the 1300X, and it still functions, that would tell you quite quite a bit....(including ability to read which BIOS is confirmed installed prior to trying the 2600 again..)
Inspect underside of CPU for any damaged/bent pins, etc...
You did not mention a GPU, but, you'd have top be using one, presumably the same one as with the 1300X, correct? Monitor connected to GPU, not mainboard's HDMI, etc?
Inspect underside of CPU for any damaged/bent pins, etc...
You did not mention a GPU, but, you'd have top be using one, presumably the same one as with the 1300X, correct? Monitor connected to GPU, not mainboard's HDMI, etc?
I have an evga gtx 1060 super super clocked. Using a display port for the connection. The ryzen 1300x doesnt have any broken pins or anything. Cant really reinstall the old cpu because I dont have any thermal paste for it (if I need it).
- Jan 1, 2018
- 18,495
- 3,976
- 73,540
You could install the 1300x with cooler and no paste and operate it ebough to get into the bios to check revision.
No worries. My ram actually popped out somehow but it didn't fall out so I never noticed it lmao.
TRENDING THREADS
-
-
-
-
Question I need some help in deciding which PSU to buy
- Started by impuls5000
- Replies: 12
-
Facebook
Twitter
Instagram