Hello,
The title says it already.
I have two problems one major and one minor problem.
My major problem is that my hdd isn't "detected" anymore, i mean windows sees it, the contents are inside it, just as it was before installing the m2 ssd but i cannot access it. I haven't screwed with any partitions or anything in that regard.
Ive proven that my disk is working fine by checking the diskmanager, acts as a healthy primary disk partition and the full 2tb are detected too.
I know that installing a m2 ssd causes it to disable some sata ports but the ones my ssd and my hdd are plugged into are both working. my normal ssd gets detected on either of the 2 remaining ports, my hdd doesnt get detected in any of them. Well i can still see the disk as mentioned before i just cannot access it.
My 2nd problem which is minor-ish is that my system won't boot unless im booting after visiting the bios. No changes done just visiting it somehow overwrites the "reboot and select proper boot device" screen.
Ive updated my bios to the newest version my mainboard manufacturer has released too.
Tech infos:
CPU: Intel Core i5-6600K CPU 3.50GHz
GPU: (not plugged in atm due to troubleshooting) Nvidia gtx 970 4g
PSU: 600W bequiet psu
MB: MSI Z170A PC-MATE (MS-7971)
BIOS: American Megatrends Inc. Ver. A.G0 06/23/2018
RAM: 16GB Kingston hyperx 2666 Mhz DDR4
M2 ssd: Corsair Force MP510 240 GB
HDD: WD 2TB
SSD: Samsung ssd 128GB
The title says it already.
I have two problems one major and one minor problem.
My major problem is that my hdd isn't "detected" anymore, i mean windows sees it, the contents are inside it, just as it was before installing the m2 ssd but i cannot access it. I haven't screwed with any partitions or anything in that regard.
Ive proven that my disk is working fine by checking the diskmanager, acts as a healthy primary disk partition and the full 2tb are detected too.
I know that installing a m2 ssd causes it to disable some sata ports but the ones my ssd and my hdd are plugged into are both working. my normal ssd gets detected on either of the 2 remaining ports, my hdd doesnt get detected in any of them. Well i can still see the disk as mentioned before i just cannot access it.
My 2nd problem which is minor-ish is that my system won't boot unless im booting after visiting the bios. No changes done just visiting it somehow overwrites the "reboot and select proper boot device" screen.
Ive updated my bios to the newest version my mainboard manufacturer has released too.
Tech infos:
CPU: Intel Core i5-6600K CPU 3.50GHz
GPU: (not plugged in atm due to troubleshooting) Nvidia gtx 970 4g
PSU: 600W bequiet psu
MB: MSI Z170A PC-MATE (MS-7971)
BIOS: American Megatrends Inc. Ver. A.G0 06/23/2018
RAM: 16GB Kingston hyperx 2666 Mhz DDR4
M2 ssd: Corsair Force MP510 240 GB
HDD: WD 2TB
SSD: Samsung ssd 128GB