Question Lenovo wont boot with Media Creation Tool Win10

JerryJG

Reputable
Nov 9, 2019
34
0
4,530
I have the following problem.
I wanted to reinstall Windows 10 on my Lenovo Ideacentre 310S.
So I installed a Win10 iso file on a USB stick.
USB stick plugged into the Lenovo and set as boot option. Now it does not boot.
Connected the hard drive and USB to another PC and formatted the hard drive on the other PC and installed windows.
Connected to the Lenovo but it does not recognize any OS.
USB stick again connected to the Lenovo but it does not load.
And sometimes it showed me different pictures:

-Windows logo (freeze)
-Windows logo "Automatic repair in progress"(freeze)
-Windows logo (image is extremely flickering and colorful (freeze))
- top left corner only "-" the sign and pc restart every 20sec

On the other PC the hard disk works with Windows.
changed Ram, Video cable, SSD, USB.
In Bios set to Legacy, secure boot turned off.
 

USAFRet

Titan
Moderator
  1. You can't boot from just the bare ISO
  2. You can't install WIndows on one system, then move that drive to another PC/laptop

You need to run the MediaCreation tool, on your other PC, and use that to create the install media on your USB stick.
 

JerryJG

Reputable
Nov 9, 2019
34
0
4,530
  1. You can't boot from just the bare ISO
  2. You can't install WIndows on one system, then move that drive to another PC/laptop
You need to run the MediaCreation tool, on your other PC, and use that to create the install media on your USB stick.
But i cant start the Lenovo Pc. The Hard Drive ist empty
 

USAFRet

Titan
Moderator
But i cant start the Lenovo Pc. The Hard Drive ist empty
Right.

You create the install media (USB) from your other PC.
Then, boot the Lenovo from that USB, and install on the internal HDD.


 

JerryJG

Reputable
Nov 9, 2019
34
0
4,530
Right.

You create the install media (USB) from your other PC.
Then, boot the Lenovo from that USB, and install on the internal HDD.


The Problem is that the Lenovo wont boot with the USB.
 

JerryJG

Reputable
Nov 9, 2019
34
0
4,530
Step by detailed step, what have you done with that flash drive?
-Installed Meadia Creation Tool on my Desktop.
-Followed the steps to create a bootable USB.
-Then Ejected the USB and connected it to the Lenovo.
-Started the Lenovo, opened up the boot menu and selected the usb drive.
-Lenovo wont boot (freeze, endless loading, no screen or restarting)
 

USAFRet

Titan
Moderator
-Installed Meadia Creation Tool on my Desktop.
-Followed the steps to create a bootable USB.
-Then Ejected the USB and connected it to the Lenovo.
-Started the Lenovo, opened up the boot menu and selected the usb drive.
-Lenovo wont boot (freeze, endless loading, no screen or restarting)
OK...those are the correct steps. (assuming #2 is correct)

Try a different flash drive?