Modem>serverCPUwin2003RRAS>switch>access pont?

[jupey]

is it possible to connect the router linksys wrt310n to the switch and make this router as an access point?

 

[rdc363]

According to the following link it does support ap mode: http://bc.whirlpool.net.au/bc/hardware/?action=h_view&model_id=757

Time to open the manual.

 

[jupey]

i had a modem that directly connected to the server using routing and remote access and my server has 2 LAN. LAN1 for modem LAN2 goes to the switch to distribute the internet. now , how will i configured my linksys wrt310n as an access point? knowing it has an AP mode. i tried to connect it to switch and configure as static access point but no internet at all. all though its connected.

 

[rdc363]

Did you connect the port of the switch to the WAN port of the router? If not do that first. Now is the router getting a valid IP address on the WAN port?

 

[jupey]

anyway thanks for the feedback, its working now, i turned it to static filling up those IP, gateways, and dns, i changed the router IP, and disable the dhcp. btw, i plugged it LAN port. now access point up.