Need help on picking out a Fan / HS

[redatassi]

I have a EVGA 780 SLI and I need advice for a good fan / hs under $40 that will fit in the case, I have a E8400 intel.


http://www.newegg.com/Product/Product.aspx?Item=N82E16835207004

Seems to be awesome CFM , 90, and seems to be quiet 24db, price is gr8, $29.99 with free shipping, BUT, would it fit??

Thank you.

 

[foolycooly]

Get this-

http://www.newegg.com/Product/Product.aspx?Item=N82E16835233029

Higher quality...one of the best HSF out there for the money.

 

[theAnimal]

Seems to be awesome CFM , 90, and seems to be quiet 24db, price is gr8, $29.99 with free shipping, BUT, would it fit??

That's a decent cooler. Measure how much clearance you have in your case.

 

[redatassi]

It is not about the case, more about the mobo, since i have the 4 ram slots taken, wonder if it will fit in the EVGA 780 SLI

 

[JohnnyLucky]

Actually it's both.

First, if your memory modules have those large tall heatsinks, then you will have a problem. Some of the large tower style cpu heatsinks kind of cover up the memory slots closest to the cpu. Luckily I had standard height memory modules with standard height heatsinks. I still had to install the memory first, then install the cpu heatsink, and finally install the motherboard inside the case.

Second, some of those large tall tower style cpu heatsinks might not fit in the case if the case is not wide enough, especially if you have a case fan mounted on the side panel. It depends on the width of the case.

 

[redatassi]

http://www.newegg.com/Product/Product.aspx?Item=N82E16820220227 is my RAM x4
http://www.newegg.com/Product/Product.aspx?Item=N82E16811144151 is my tower case

 

[JohnnyLucky]

The memory is fine - standard height memory models with standard height heatsink. No problem there.

The case is 7.8 inches wide according to specifications at newegg.com. The problem is going to be the duct on the panel. It's the one with the "Aspire" fan grill. It sits right over where the cpu is on a motherboard. You'll have to remove the side duct if you want to install a tower style cpu heatsink. I just took another look at the photos. I definitely looks like installation of the side air duct is optional. In the next to the last photo it shows the side duct as one of the parts that can be installed. You're in luck.

Do you really like that case?

 

[redatassi]

do you recomend another?

I am not looking to spend over $60

 

[JohnnyLucky]

Nope, no recommendations for cases under $60.00. I was just wondering about all the bling. I prefer simple cases with clean lines.

 

[theAnimal]

do you recomend another?

I am not looking to spend over $60

Antec 300, Cooler Master 590. I've also heard good things about the Rosewill 5600 series.