I got a new gpu (Asus Dual Gtx 1070 8gb), new Ram (HyperX Fury 2x8gb) and a new psu (Evga 600w 80+). My other parts are:
Motherboard - Asus P8Z77-V lx
Cpu - Intel i5-3570k
Storage - 128gb SSD and 2 HDDs
I deinstalled my old graphics driver and used amd cleanup utiliy afterwards to make sure i got rid of the drivers. After I put all the new parts in I tried to start the PC got 1 short beep instantly, the gpu fans started spinning, then after a few seconds i got 1 long and 3 short beeps (motherboard manual said that means "no vga detected") and the gpu fans stopped. My screen remains black the whole time.
Things I tried:
- reseating gpu
- using different ram slots or only 1 ram stick
- removing cmos battery for a few minutes
- resetting cmos via jumper (and of course putting it back afterwards)
- removing both hdds and everything external except for mouse and keyboard
- using integrated graphics without gtx 1070, pc started normally
- using old gpu (msi r9 270x hawk), pc started normally
- using old psu (bequiet pure power 530w)
- using hdmi and dvi connection
- using different 8pin connectors with both psus
Because it worked with my old gpu and without gpu i think it has to do with the gtx 1070 and not with my new ram, but im not sure. The 1070 is perfectly new and arrived today. I also updated my bios about a year ago and its still the newest version. And yes I always put in the 8pin pcie connector from the psu into the graphics card. Both psus should be powerfull enough becauses asus recommends a 500w psu for the 1070. I dont know what else I can do
I would appreciate any help and can give more information if needed. Thanks in advance
Motherboard - Asus P8Z77-V lx
Cpu - Intel i5-3570k
Storage - 128gb SSD and 2 HDDs
I deinstalled my old graphics driver and used amd cleanup utiliy afterwards to make sure i got rid of the drivers. After I put all the new parts in I tried to start the PC got 1 short beep instantly, the gpu fans started spinning, then after a few seconds i got 1 long and 3 short beeps (motherboard manual said that means "no vga detected") and the gpu fans stopped. My screen remains black the whole time.
Things I tried:
- reseating gpu
- using different ram slots or only 1 ram stick
- removing cmos battery for a few minutes
- resetting cmos via jumper (and of course putting it back afterwards)
- removing both hdds and everything external except for mouse and keyboard
- using integrated graphics without gtx 1070, pc started normally
- using old gpu (msi r9 270x hawk), pc started normally
- using old psu (bequiet pure power 530w)
- using hdmi and dvi connection
- using different 8pin connectors with both psus
Because it worked with my old gpu and without gpu i think it has to do with the gtx 1070 and not with my new ram, but im not sure. The 1070 is perfectly new and arrived today. I also updated my bios about a year ago and its still the newest version. And yes I always put in the 8pin pcie connector from the psu into the graphics card. Both psus should be powerfull enough becauses asus recommends a 500w psu for the 1070. I dont know what else I can do
I would appreciate any help and can give more information if needed. Thanks in advance