As the title says, a new PC (mostly new - assembled using a mix of new and old parts from my old PC, whose CPU recently died) won't POST. A red CPU light briefly flashes (I'm not sure if that is normal, I'm used to the the LED numerical POST code readout that they used to put on mobos <£400) and goes out, and then shows a yellow DRAM light on the mobo which stays.
I have attempted the following:
Tried the RAM in a different PC - it works
Tried another PC's RAM in the new build - it doesn't work
Unmounted the CPU cooler in case I had it too tight and bending the mobo or pins - read about this being an issue sometimes
Removed the CPU and inspected it and the socket for damage, bent pins or dirt; there was none
Checked the power cables, quite sure they're all seated snugly
Here's my system specs:
Mobo - ASUS TUF Z690 D4
CPU - i5 13600K
RAM - 2x Corsair 16GB CMK32GX4M2B3200C16 ver 4.32
GPU - GTX 1080Ti
PSU - Cooler Master RS-A00 AFBA-G1 V1000
I'm all out of ideas here. Any advice would be appreciated. Thanks.
I have attempted the following:
Tried the RAM in a different PC - it works
Tried another PC's RAM in the new build - it doesn't work
Unmounted the CPU cooler in case I had it too tight and bending the mobo or pins - read about this being an issue sometimes
Removed the CPU and inspected it and the socket for damage, bent pins or dirt; there was none
Checked the power cables, quite sure they're all seated snugly
Here's my system specs:
Mobo - ASUS TUF Z690 D4
CPU - i5 13600K
RAM - 2x Corsair 16GB CMK32GX4M2B3200C16 ver 4.32
GPU - GTX 1080Ti
PSU - Cooler Master RS-A00 AFBA-G1 V1000
I'm all out of ideas here. Any advice would be appreciated. Thanks.