Question No display after BIOS update

[Dreezey]

I attempted to update my BIOS from the GIGABYTE website. This update was from the F11 version to the new F32 version using the Q-flash method. I downloaded, unzipped the files, and extracted them to a formatted USB drive in order to flash the new BIOS version. However, after the BIOS update my computer does not display anything. The screen remains black and I am unable to access the BIOS menus. I have attempted to fix this issue myself with no success. These attempts consisted of:

-Removing the CMOS battery

-Clearing the CMOS battery

-Using the Q-flash plus method (twice) for BIOS versions F30/F11. For this method I disconnected every component except for the power supply's connections to the motherboard itself.

I am hoping that I did not do enough damage to the motherboard to make a replacement necessary. Is there any other options I could try in order to fix this issue?

Build
CPU: Ryzen 5 3600
GPU: Sapphire AMD 5700 XT
Motherboard: GIGABYE X570 AORUS Elite
RAM: TridentZ neo (2x 8GB) DDR4 3600 MHz CL16-19-19-39 1.35 V
PSU: Corsair RM850 ATX (80 Plus Gold)
SSD: Samsung EVO 1 TB 2.5 inch SATA III internal
Case: NZXT H710 ATX midtower

 

[Mike2009]

Theres post on another forum (Linus tech tips)I found that might help you , Im not sure if its allowed but im gonna post that post link here and hope it helps you ((sorry mod if thats a violation just trying to help the op here)) Link to Post

if that dont work ,,, you need to rma

 

[Dreezey]

Theres post on another forum (Linus tech tips)I found that might help you , Im not sure if its allowed but im gonna post that post link here and hope it helps you ((sorry mod if thats a violation just trying to help the op here)) Link to Post

if that dont work ,,, you need to rma

Thanks for the suggestion. I tried those steps again, however the issue has persisted. I will most likely try the RMA route now.

 

[ssbaraskar99]

I attempted to update my BIOS from the GIGABYTE website. This update was from the F11 version to the new F32 version using the Q-flash method. I downloaded, unzipped the files, and extracted them to a formatted USB drive in order to flash the new BIOS version. However, after the BIOS update my computer does not display anything. The screen remains black and I am unable to access the BIOS menus. I have attempted to fix this issue myself with no success. These attempts consisted of:

-Removing the CMOS battery

-Clearing the CMOS battery

-Using the Q-flash plus method (twice) for BIOS versions F30/F11. For this method I disconnected every component except for the power supply's connections to the motherboard itself.

I am hoping that I did not do enough damage to the motherboard to make a replacement necessary. Is there any other options I could try in order to fix this issue?

Build
CPU: Ryzen 5 3600
GPU: Sapphire AMD 5700 XT
Motherboard: GIGABYE X570 AORUS Elite
RAM: TridentZ neo (2x 8GB) DDR4 3600 MHz CL16-19-19-39 1.35 V
PSU: Corsair RM850 ATX (80 Plus Gold)
SSD: Samsung EVO 1 TB 2.5 inch SATA III internal
Case: NZXT H710 ATX midtower

Did you tried connecting monitor to different video ports ?

Does keyboard Numlock light is On, does turns OFF if you press NumLock key ?

Does Mouse has its light ON?