G
Guest
Guest
Which is better for overclocking this board? Adjusting the FSB? or the Clock Multiplier?
This is my system:
Athlon TBIRD 1.2 266 FSB overclocked at 1.33 (133X10)
Mini Super ORB Heatsink and Fan
EPOX8k7a ( to be changed to EPOX8k7a+ raid )
128 X 2 DDR ram (Nania Chipset)
SBLIVE 5.1
ASUS V7100
Maxtor 40 gig
Seagate 10 gig
PLEXTOR 16x10x40
Sony 50X
Generic Floppy
Surecom 10/100 Lancard
350 watts power supply
What i did was set the switches to 10X multiplier, then i changed clock value to 133, i tried changing it to 140 but i hang up on games. I did increase the voltage by 1 increment. Can i still make this go higher? should i just put the multiplier back to 9 and change the clock to 145 (above)?
Its time to pause for a beer.. CHEERS!
This is my system:
Athlon TBIRD 1.2 266 FSB overclocked at 1.33 (133X10)
Mini Super ORB Heatsink and Fan
EPOX8k7a ( to be changed to EPOX8k7a+ raid )
128 X 2 DDR ram (Nania Chipset)
SBLIVE 5.1
ASUS V7100
Maxtor 40 gig
Seagate 10 gig
PLEXTOR 16x10x40
Sony 50X
Generic Floppy
Surecom 10/100 Lancard
350 watts power supply
What i did was set the switches to 10X multiplier, then i changed clock value to 133, i tried changing it to 140 but i hang up on games. I did increase the voltage by 1 increment. Can i still make this go higher? should i just put the multiplier back to 9 and change the clock to 145 (above)?
Its time to pause for a beer.. CHEERS!