Hi all,
So I built up a really old pc of mine out of 2 previous pc's.
Everything is working fine and dandy, except for one small...tiny problem.
There is no power to any input devices, not the front USB not the rear USB not the PS2 ports. Heck not even the separate PCI USB card.
I am unsure what the problem is. When I start the pc, the case's 2 front lights (eye LED's) light up. It has not done that for ages so I definitely know how to plug a pc in. However it gives me the following info: I'd love to send this picture to you guys but I can only take a photo on that pc on my mobile phone so will have to suffice with describing the info:
Energy* screen:
GA-K8N-SLi F2
CPU: AMD Athlon(tm) 64 3.2Ghz
<CPUID:00010FF) Patch ID:0041>
Memory Testing : 524288k OK
Memory information : SIngle Channel, 64-bit
CPU clock freq 200 Mhz
IDE Channel 0 Master : None
IDE Channel 0 Slave : LITE-ON DVD SHD-16P1S GS03
IDE Channel 1 Master : ST396013qa 8.01
IDE Channel 1 Slave : None
CMOS checksum error - Defaults loaded
<F1>to continue, <DEL>: BIOS Setup
Now I would love to press Del, F1 or even F1 and then on the next screen F9 however I can't press a damn thing since the led's on my input devices / numlock, capslock, scrolllock on the keyboard won't light up nor will any of them even register if I tap a button.
Guys I need your help.
So I built up a really old pc of mine out of 2 previous pc's.
Everything is working fine and dandy, except for one small...tiny problem.
There is no power to any input devices, not the front USB not the rear USB not the PS2 ports. Heck not even the separate PCI USB card.
I am unsure what the problem is. When I start the pc, the case's 2 front lights (eye LED's) light up. It has not done that for ages so I definitely know how to plug a pc in. However it gives me the following info: I'd love to send this picture to you guys but I can only take a photo on that pc on my mobile phone so will have to suffice with describing the info:
Energy* screen:
GA-K8N-SLi F2
CPU: AMD Athlon(tm) 64 3.2Ghz
<CPUID:00010FF) Patch ID:0041>
Memory Testing : 524288k OK
Memory information : SIngle Channel, 64-bit
CPU clock freq 200 Mhz
IDE Channel 0 Master : None
IDE Channel 0 Slave : LITE-ON DVD SHD-16P1S GS03
IDE Channel 1 Master : ST396013qa 8.01
IDE Channel 1 Slave : None
CMOS checksum error - Defaults loaded
<F1>to continue, <DEL>: BIOS Setup
Now I would love to press Del, F1 or even F1 and then on the next screen F9 however I can't press a damn thing since the led's on my input devices / numlock, capslock, scrolllock on the keyboard won't light up nor will any of them even register if I tap a button.
Guys I need your help.