problems with burners and dvd play after sp2

[Guest]

Archived from groups: microsoft.public.windowsxp.basics (More info?)

I hope someone here can help. I have talked to 5 Microsoft techs that cant
fix my problem. I have a dell 8250, xp home, 2.4gig pent 4, 512 ram, 200 gigs
of hard drive. burning programs are Nero 6, sonic my dvd, or pinnacle.
Pre sp2 I burned a lot, dvds movies etc. After sp2 I can no longer burn or
even watch dvds anymore. I get reset errors in both my dvd player and the
burner. I spoke to a Microsoft tech and was told to remove sp2 and see what
happens, same problems, deleted drivers and let them reinstall, same problem.
Had me check some registry settings and all 3 were correct. I went as far as
buying a new burner, removing all the software and reinstalling. Replaced the
cables to the motherboard. Nothing works. I took the original burner to a
friends house and it works fine. I had NO problems with my machine before sp2
install. Any ideas ANYONE???? PLEASE???

 

[Guest]

Archived from groups: microsoft.public.windowsxp.basics (More info?)

have you patched with updates for sp2 from your burning
program suppliers.

>-----Original Message-----
>I hope someone here can help. I have talked to 5 Microsoft
techs that cant
>fix my problem. I have a dell 8250, xp home, 2.4gig pent
4, 512 ram, 200 gigs
>of hard drive. burning programs are Nero 6, sonic my dvd,
or pinnacle.
>Pre sp2 I burned a lot, dvds movies etc. After sp2 I can
no longer burn or
>even watch dvds anymore. I get reset errors in both my dvd
player and the
>burner. I spoke to a Microsoft tech and was told to remove
sp2 and see what
>happens, same problems, deleted drivers and let them
reinstall, same problem.
>Had me check some registry settings and all 3 were
correct. I went as far as
>buying a new burner, removing all the software and
reinstalling. Replaced the
>cables to the motherboard. Nothing works. I took the
original burner to a
>friends house and it works fine. I had NO problems with my
machine before sp2
>install. Any ideas ANYONE???? PLEASE???
>.
>

 

[Guest]

Archived from groups: microsoft.public.windowsxp.basics (More info?)

Connect your CD-R/W drive as slave to the same IDE cable as your hard drive
and see if that works. If it works on the Primary controller but not on the
Secondary controller you might have a bad Secondary controller on the
motherboard. That's bad news as you will need to replace the board.

Here are some other ideas that I would try

1) check to ensure you have DMA enabled for your controller. See here if you
don't know what I mean http://www.blackmaxpc.com/Guides/Enable_DMA.htm

2) ensure that you have disabled XP's built in recording software whenever
you use third party burning software. From My Computer windows right click
the burner icon and select Properties->Recording Tab.

3) If the motherboard uses an intel chipset then you should try installing
the "intel accelerator" from www.intel.com

if the above don't work then:

1) download and try the fix from Alex Nichol's site although I suspect that
at least one of the 5 techs at MS would have tried this one
http://www.aumha.org/a/xpcd.htm (look in the Problems section)

2) try a clean install of XP on a repartitioned and reformatted drive. See
if you can burn with only XP's native software. It will not burn to DVD
though but see if you can at least burn to CD-R/W with it. If not then
install one piece of burning software (remember to disable XP's burning
software first)



--

Harry Ohrn MS-MVP [Shell/User]
www.webtree.ca/windowsxp


"rrlr420" <rrlr420@discussions.microsoft.com> wrote in message
news:0587E22A-5D65-4541-8E7A-2E323489237B@microsoft.com...
>I hope someone here can help. I have talked to 5 Microsoft techs that cant
> fix my problem. I have a dell 8250, xp home, 2.4gig pent 4, 512 ram, 200
> gigs
> of hard drive. burning programs are Nero 6, sonic my dvd, or pinnacle.
> Pre sp2 I burned a lot, dvds movies etc. After sp2 I can no longer burn or
> even watch dvds anymore. I get reset errors in both my dvd player and the
> burner. I spoke to a Microsoft tech and was told to remove sp2 and see
> what
> happens, same problems, deleted drivers and let them reinstall, same
> problem.
> Had me check some registry settings and all 3 were correct. I went as far
> as
> buying a new burner, removing all the software and reinstalling. Replaced
> the
> cables to the motherboard. Nothing works. I took the original burner to a
> friends house and it works fine. I had NO problems with my machine before
> sp2
> install. Any ideas ANYONE???? PLEASE???

 

[Guest]

Archived from groups: microsoft.public.windowsxp.basics (More info?)

Did you try a restore to a time it worked after you removed sp2.?

"rrlr420" <rrlr420@discussions.microsoft.com> wrote in message
news:0587E22A-5D65-4541-8E7A-2E323489237B@microsoft.com...
> I hope someone here can help. I have talked to 5 Microsoft techs that cant
> fix my problem. I have a dell 8250, xp home, 2.4gig pent 4, 512 ram, 200
gigs
> of hard drive. burning programs are Nero 6, sonic my dvd, or pinnacle.
> Pre sp2 I burned a lot, dvds movies etc. After sp2 I can no longer burn or
> even watch dvds anymore. I get reset errors in both my dvd player and the
> burner. I spoke to a Microsoft tech and was told to remove sp2 and see
what
> happens, same problems, deleted drivers and let them reinstall, same
problem.
> Had me check some registry settings and all 3 were correct. I went as far
as
> buying a new burner, removing all the software and reinstalling. Replaced
the
> cables to the motherboard. Nothing works. I took the original burner to a
> friends house and it works fine. I had NO problems with my machine before
sp2
> install. Any ideas ANYONE???? PLEASE???