Archived from groups: microsoft.public.windowsxp.work_remotely (
More info?)
Glad to hear the good news...
Take care...
--
Al Jarvi (MS-MVP Windows Networking)
Please post *ALL* questions and replies to the news group for the mutual benefit of all of us...
The MS-MVP Program -
http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no rights...
"Randy" <Randy@discussions.microsoft.com> wrote in message
news:64546D3B-3544-4C22-BCEB-AAC4D0259973@microsoft.com...
> Al - You really helped me get this working. I guess I somehow I missed the
> fact that I couldn't test this from within my own network via 68.x....! Once
> we got the local access working (192.168...) I figured we had gotten real
> close! But, I tried it via a dialup connection and it WORKED! Something you
> had me check in your previous posts must have cleared up some of the other
> problems I was having.
>
> ALL YOUR HELP IS GREATLY APPRECIATED! Thanks again.
>
> Randy, now with RDC working
>
>
> "Sooner Al" wrote:
>
>> To test from a PC on your LAN to another PC on your LAN you can *NOT* use the public IP, ie. the
>> 68.X.X.X address. That is not a valid test. Since you can connect internally over your LAN using
>> the
>> private LAN IP and the telnet test succeeds then you know both port forwarding is setup correctly
>> and RD is enabled...
>>
>> To call from the remote site use the public IP of the router, ie. the 68.X.X.X address. You can't
>> use the host name over the public internet... With that said however...
>>
>> If your ISP assigns a dynamic IP to your router, then another solution is to setup an account
>> with
>> one of the dynamic naming services that map a fully qualified domain name to the IP. In my case
>> I
>> use a FREE service from No-IP.com. The No-IP.com software runs on my XP Pro box and on a time
>> schedule basis contacts the No-IP.com servers. The No-IP.com servers then know what your IP is
>> and
>> maps that to a fully qualified domain name. That information is then propagated over the public
>> internet. You could then call the client PC using the fully qualified domain name. It works very
>> well for me when I call my home network using Remote Desktop.
>>
>>
http://www.no-ip.com
>>
>> --
>> Al Jarvi (MS-MVP Windows Networking)
>>
>> Please post *ALL* questions and replies to the news group for the mutual benefit of all of us...
>> The MS-MVP Program -
http://mvp.support.microsoft.com
>> This posting is provided "AS IS" with no warranties, and confers no rights...
>>
>> "Randy" <Randy@discussions.microsoft.com> wrote in message
>> news:AFBD18F4-3345-4D3D-BFB6-7C6D50EF809E@microsoft.com...
>> >I just tried using the RDC from my client ON my network via:
>> > 192.168.0.n and WAS able to FINALLY see the login screen, etc! However,
>> > when I try to come in via the actual address of WAN IP Address
>> > (68.nnn.nn...) I continue to see the same error as before! Not sure if this
>> > matters, but at least feel am getting somewhere now!
>> >
>> > Thanks again for any and all help!
>> >
>> >
>> > "Sooner Al" wrote:
>> >
>> >> Have you tested this over your home LAN to see if you can connect from another local PC just
>> >> to
>> >> make
>> >> sure that part works? Are you using a static IP address on the PC your trying to reach? If not
>> >> its
>> >> possible the local LAN IP has changed if the PC rebooted/restarted...
>> >>
>> >>
http://www.portforward.com/networking/static-xp.htm
>> >>
>> >> If local RD access works, then verify port forwarding on the router for TCP Port 3389...Call
>> >> using
>> >> the public IP of the router, ie. the IP assigned by your ISP.
>> >>
>> >>
http://www.portforward.com/routers.htm
>> >>
>> >> Try this telnet test to see if you can pinpoint the problem...
>> >>
>> >>
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q187628
>> >>
>> >> If your running any personal firewall software on the target PC, disable or uninstall to
>> >> test...
>> >>
>> >> --
>> >> Al Jarvi (MS-MVP Windows Networking)
>> >>
>> >> Please post *ALL* questions and replies to the news group for the mutual benefit of all of
>> >> us...
>> >> The MS-MVP Program -
http://mvp.support.microsoft.com
>> >> This posting is provided "AS IS" with no warranties, and confers no rights...
>> >>
>> >> "Randy" <Randy@discussions.microsoft.com> wrote in message
>> >> news:3E8BA28F-22F8-447A-9CCF-078CBEE29647@microsoft.com...
>> >> > Hi -
>> >> > I am trying to use RDC on my network at home so that I can access my main
>> >> > home machine from my office at work. I have done everything that I have read
>> >> > about to make sure that RDC is enabled, but still receive the following
>> >> > message:
>> >> > 'The Client could not connect to the remote comptuer.
>> >> > Remote Connection might not be...
>> >> >
>> >> > I have attempted to do port forwarding (via my Netgear MR314 Router) - Start
>> >> > Port 3389 - end port 3389 and identifying the address/Server IP Address
>> >> > (192.168.0.n) of my local machine I want to be able to access, but no luck.
>> >> > I have checked the firewall and have checked (and rechecked) that the remote
>> >> > desktop is selected (note, I even Unchecked ICFand still no luck).
>> >> >
>> >> > I have spent a bunch of time trying and double checking the various
>> >> > suggestions in some of the other posts, but it appears that most folks don't
>> >> > have this problem much.
>> >> > I am running XP Pro SP1 on the machine I am trying to hit.
>> >> >
>> >> > To try to establish the connection, I use the RD Connection program and have
>> >> > tried hitting my home box from one of my other computers with both the REAL
>> >> > ip address of my network/internet connection at home and using the name of my
>> >> > machine via DynDNS. (I have double checked the IP Address at home). The
>> >> > error is always the same - Client could not connect ...
>> >> > Am I just missing something really easy or totally confused? Any
>> >> > suggestions would be greatly appreciated!
>> >> >
>> >> > Thanks much
>> >> >
>> >>
>> >>
>>
>>