Question stuck on bios after changing the psu helpp me

[arch99j]

so recently i upgraded my psu from 500 w to 750 w i was getting blue screen with my older psu now after i pluged the new psu im stuck in the bios and my system ssd m.2 is not showing
i tried the old psu the pc works just fine any soltions ....

 

[rgd1101]

brand and model of these psu?
did you reused old psu cable?

 

[arch99j]

old psu raidmax 500 w
new psu msi mag a750 bn

 

[arch99j]

i used the new cable for the new psu

 

[--SID--]

Reset motherboard BIOS!

 

[arch99j]

Reset motherboard BIOS!

i did take off the cmos battery same result

 

[Roland Of Gilead]

i did take off the cmos battery same result

That's not quite a CMOS clear. You will need to short two pins on your mobo for the CMOS to take effect.

Before any other answers, what is your full PC spec? CPU/Mobo/Ram/GPU etc. We're only guessing without that.

 

[arch99j]

That's not quite a CMOS clear. You will need to short two pins on your mobo for the CMOS to take effect.

Before any other answers, what is your full PC spec? CPU/Mobo/Ram/GPU etc. We're only guessing without that.

cpu : r5 5600g

gpu : rtx 3060 gb galax

ram : 16 gb ( 8×2) 3200 mhz xpg

mobo : asus prime b550m_k

ssd m.2 xpg 256 gb

psu : msi mag a 750 bn

 

[Roland Of Gilead]

Okay, ideally you need to be on 3607 bios for your mobo. You can check which bios you have by running CPU-z and looking at the mainboard tab.

Clear CMOS using this method: https://www.asus.com/support/faq/1040820/

Then let us know how that goes.

 

[arch99j]

Okay, ideally you need to be on 3607 bios for your mobo. You can check which bios you have by running CPU-z and looking at the mainboard tab.

Clear CMOS using this method: https://www.asus.com/support/faq/1040820/

Then let us know how that goes.

i did update my bios to latest version from the offcial asus website i will clear the cmos ok and let you know

 

[arch99j]

i did update my bios to latest version from the offcial asus website i will clear the cmos ok and let you know

i performed a cmos clear now my m.2 has apeared in the bios what should i do next ?

 

[arch99j]

i got same result it wont boot to windows even with the cmos clear

 

[Roland Of Gilead]

i performed a cmos clear now my m.2 has apeared in the bios what should i do next ?

Prob have to do fresh install of Windows.

 

[arch99j]

Prob have to do fresh install of Windows.

even when it worked fine with the old psu ???

 

[Roland Of Gilead]

even when it worked fine with the old psu ???

Well, we're trying to rule things out. I guess that given the drive wasn't recognized until the cmos clear, then re-installing windows might be an option, if it's still not booting.

 

[arch99j]

Well, we're trying to rule things out. I guess that given the drive wasn't recognized until the cmos clear, then re-installing windows might be an option, if it's still not booting.

okey i will try to do a fresh install of windows

 

[Roland Of Gilead]

okey i will try to do a fresh install of windows

I know that's a bit of a pain, but hopefully it works.

 

[arch99j]

I know that's a bit of a pain, but hopefully it works.

yes hopfully thanks bro

 

[Roland Of Gilead]

yes hopfully thanks bro

No worries. Let us know how it goes.