TH Water Cooling Club and Picture Gallery

[Motopsychojdn]

Reported Alli, please sell your wares elsewhere
Moto

 

[amuffin]

amdfangirl got it under control Whenever there's spam I just spam her on steam LOL

 

[rubix_1011]

I would encourage everyone to use the reporting tools on the forum to report issues and not to directly contact a moderator via external messaging/email unless they specifically request it. They might not be able to get to the issue as quickly as another mod who might be online at the time. This also creates a selective accountability where that person feels like they are the only ones to be called to correct an issue, so I don't want to create a false sense that they are always immediately available if you have outside media contact with them.

Just food for thought.

 

[amuffin]

she asked me to 😛

 

[rubix_1011]

Fair enough; I just don't want to give everyone that impression that this is the course of action to take- because it isn't. I can't control the wishes of other Mods and if that is their preference, I fully respect that.

 

[amuffin]

I see...I'm gonna get my WC parts in 2 weeks!!

 

[rubix_1011]

Great news! You'll have to post up your results and pics, if possible. All this time...must seem like an eternity until it arrives and you can unpack it all.

New hardware arriving is like it's own festive holiday- you get to open boxes and packages and smile in delight over the shiny new stuff you're about to play with.

 

[mikolrayne]

70'c on load?
Your thermal pastes on properly right?
You really should be getting much better temps from all those radiators 😛
I wouldn't worry about adding the mobo to the loop, You have great cooling on the Rog anyhow
I'd reseat the Cpu with good fresh paste first and make sure you have good flow, no kinks etc in the loop
Moto

Yup, reseated 3 times with the Arctic MX4. As for the kinks, you probably noticed the paper strips coiled around some parts of the tubing in the pictures. Those are placed where the tubes kink. It's a pretty cheap and effective way to remove the kinks!

It's probably my overclocking though, running the 3930k at 4.5Ghz on 1.40V. It's rock stable though. =D

 

[mikolrayne]

Thanks! Was thinking of stacking another 120mm and a 360mm on top of the existing ones, with the fans sandwiched in the middle. Will that be a good idea?

Sandiwched rads are a bad idea and perform poorly.

My 3930k's running 70°C on load currently, afraid the temps will skyrocket when i add the GPUs and Mobo to the loop.

This sounds pretty high to me, but I don't have any experience with a 3930. What are you using to load it? Is this stock or OC speeds?

Hmm alright, will scrap the idea then. Thanks!
It's OC temps, running it at 4.5GHz at 1.40V!

 

[mikolrayne]

Wow 70C!!
My H100 in my RV02-B is colder...


Great work on managing to fit that many rads though 😉

Thanks! Had to cut a huge hole at the back of the case to fit the 360mm rad. =X

 

[Motopsychojdn]

^Cutting holes, I like the attitude mate
Moto

 

[mikolrayne]

^Cutting holes, I like the attitude mate
Moto

Thanks! Would have posted pictures if it wasn't so badly done. Didn't have a Dremel so I drilled 4 holes large enough to fit the blade of a jigsaw in and sawed the hole.

 

[jrwizbang]

I drilled 4 holes large enough to fit the blade of a jigsaw in and sawed the hole.

Oh boy..... Been there 😛

 

[volks1470]

These are all my previous builds

2009

2011

2012 and current

 

[tjosborne]

http://i33.photobucket.com/albums/d71/Volks1470/IMG_3928.jpg

http://i33.photobucket.com/albums/d71/Volks1470/e3fbe8db.jpg

http://i33.photobucket.com/albums/d71/Volks1470/882b3c7a.jpg

so are those pcs you built people? or your upgrades? or what?

 

[volks1470]

so are those pcs you built people? or your upgrades? or what?

fixed it 😉

They were/are all my self built PCs.

 

[mikolrayne]

These are all my previous builds

2009

http://i33.photobucket.com/albums/d71/Volks1470/IMG_3928.jpg

2011

http://i33.photobucket.com/albums/d71/Volks1470/e3fbe8db.jpg

2012 and current

http://i33.photobucket.com/albums/d71/Volks1470/882b3c7a.jpg

Oh wow! Great job mate.
So you change a case around once a year huh 😛

 

[Motopsychojdn]

And never tidy your cables...... 😛
Raven looks best there to me, but even that had messy cables/cablie ties?,
Your current one needs Moto love, and some black spraypaint on that Psu
**Put your Pci slotcovers back on too, keeps noise in and dust out
Moto

 

[volks1470]

And never tidy your cables...... 😛
Raven looks best there to me, but even that had messy cables/cablie ties?,
Your current one needs Moto love, and some black spraypaint on that Psu
**Put your Pci slotcovers back on too, keeps noise in and dust out
Moto

haha, i try to do the best for cable management but it's always those damned fan wires getting in the way.
I've been curious to try out a custom wiring job. Such as a power distribution block. then run the perfect length of cabling to each fan and/or device. Such as this:
http://www.marathonsp.com/
is that what everyone uses to make such tidy cases???

Twisty ties are the best! Quick and easy installation and removal! They just don't look the best...
I was on a budget for a modular PSU and Antec had the best deal with their 550W. It's just grey

 

[Motopsychojdn]

Nope, I use around the houses routing to use up slack, I orient the fan bodies/housings to the best position, sometimes to use the slack, sometimes to allow the full reach of the cable,
extending wires to route out of sight is another option though, not sure I would use the blocks you link, but I did wire four 80mm's together on a roofmod once, and the join was in the middle of the four,
the main tool is looking, and patience I'd say,
most folks don't go to my extremes as its too harsh, but for a cleanlooing case its always worth the effort, like when people have to ask where your cables are, or if that pic is before you wired it all up 😛
Moto

 

[jrwizbang]

Like your setups Volks. Specs? Also, nice avatar 😛 Nathan Barnatt is a legend.

 

[volks1470]

Like your setups Volks. Specs? Also, nice avatar 😛 Nathan Barnatt is a legend.

Ah yes! Nathan is pretty awesome, i thought it'd make a funny avatar!

I have a lot more builds, but they aren't water cooling so i didn't post pictures

Specs:
2009 - CM HAF 932 V1 - AMD Phenom II X3 720 @ 3.7GHz - 790FX MB - Nvidia GTX 295 - 4GB DDR3 1333MHz - Corsair TX750 V1
2010 - upgraded to AMD Phenom II X4 965 @ 3.8GHz
upgraded to 5870
added second 5870
Sold
2010 - Thermalright (terrible) case - AMD Phenom II X2 555 @ 3.6GHz - Crosshair IV Formula 890FX - AMD 6870 - 4GB 1333MHz - Corsair TX750 V1
upgraded to below
2011 - AMD Phenom II X6 1055T @3.8GHz - Crosshair IV Formula 890FX - AMD 6870 X-Fire - 8GB 1333MHz Corsair TX750 V1
sold
2012 and current - CM Sniper - Intel 3570K @ 4GHz - Pro3 Z77 - (awaiting AMD 7770) - 4GB 1333Mhz - Antec Mod. 550W

 

[Motopsychojdn]

You can post them over in homebuilds gallery though
just make sure those cables are up to it hehe
Moto

 

[earl45]

This is the water cool system I'm putting together for my 3770k Sabertooth system
tell me what you think Malmental and Motopsychojdn.

http://www.xoxide.com/phobya-xtrem [...] iator.html
http://www.xoxide.com/swiftech-mcp655.html
http://www.xoxide.com/single-ddcdual-br.html
http://www.xoxide.com/xspc-raystor [...] intel.html
http://www.xoxide.com/primoflex-clear-12-34.html
http://www.xoxide.com/g1-4-to-1-2-bfit.html
http://www.xoxide.com/lamptron-alu [...] black.html
http://www.xoxide.com/primochill-e [...] clear.html
http://www.xoxide.com/swiftech-rad [...] ount.html.

so far I'm at about $486 + tax and SH.
Change pump and res.

 

[amuffin]

What i meant was start a new thread... -______-