TH Water Cooling Club and Picture Gallery

[Lutfij]

I want to switch to water cooling but I can't find water blocks for those cards.

eeyah, I mention this alot, finding a block for your non-reference cards will def be a pain in the backside. You could go universal but then you'll need to be creative getting the mosfets/vrm's to cool as you don't exposure to the waterblock.

If you need more info PM me, this thread is for gallery purposes wouldn't want to side track it - we have a discussions thread for that

 

[rubix_1011]

There is a portion of the sticky dedicated to universal waterblock cooling considerations.

 

[4Ryan6]

cable management on that inside would do you wonders!

Looks like a spaghetti monster.

Where's Moto?

 

[Lutfij]

:lol: he seems to be having an off day - as stated on the other gallery thread.

 

[toolmaker_03]

Well here is a look at my new build









well that's what it looks like

 

[jacknhut]

Finally got my water cooling parts in:

http://i1059.photobucket.com/albums/t436/roxas2030/Finished PC/IMG_0356.jpg

http://i1059.photobucket.com/albums/t436/roxas2030/Finished PC/IMG_0357.jpg

http://i1059.photobucket.com/albums/t436/roxas2030/Finished PC/IMG_0358.jpg

http://i1059.photobucket.com/albums/t436/roxas2030/Finished PC/IMG_0360.jpg


i5 3570k @ 4.6 GHz
GTX 670 Windforce in SLI
8gb (4x2) 1600
WC:

XSPC raystorm water block
Killcoil + Distilled water
EK 220 rad
Swiftech 655 speed control pump
XSPC res

I didn't have the amber lights on but the waterblock has LEDs.

Is that the Maximus V Formula that you are also cooling? Very nice board!! I heard its kinda restrictive though when you watercool that mainboard ?

 

[cyansnow]

Final Murdermod build, with the same WC parts I have had for a while which include a ek dcp 4.0 pump, ek supreme HF full nickel, watercool gtx 680 block/backplate, and a new reservoir I got with this build, which is an EK multioption 250.

Front of the case, of course there are those orange fans I need to fix but as of now I don't have the time to go looking for new fans - mainly because these maintain high airflow and stay silent.

Back wiring, I fully sleeved my power supply this time and was extremely pleased with the results.

A possibly final design for the interior, I plan on tinting the side window a darker shade of black and adding 1 white LED strip to give some light.

 

[jrwizbang]

Wow that's looking really good cyansnow.

 

[Motopsychojdn]

Few minor, MINOR niggles there but nothing worth mentioning, very nicely done mate,
C.M. Award for Cyan

@Toolmaker, I love that bottom pic man, looks otherworldly
*just ran through the thread again from page one, we really do have some talented/crazy folks in here

Moto

 

[lowjack989]

@Cyan---> What case is that, that you are using for the Murdermod? Is it a Fractal Design?

 

[mikolrayne]

Hey gang, the postman arrived yesterday, and guess what arrived?!?!

Yepp!!! My new spandex underwears!!!.... Just kidding.

Ok so I briefly(pun intended) fixed it together, and it looks like that now.

A closer view of it.

Note:
I'm still waiting for my 3rd 6970 to return from its RMA trip, therefore there's only 2 6970 in my case at the moment.
Also, the EK XTX 120mm Radiator can't fit inside my case, i'm still finding a way to get it inside.

 

[cyansnow]

@Cyan---> What case is that, that you are using for the Murdermod? Is it a Fractal Design?

SilverStone TJ07

To be more exact, the silverstone TJ07 project actually named "Murdermod" by Charles H. The project has been discontinued for some time now but he has been working on a second case as a successor to the case style seen in my build. The mod replaces the top panel, midplate, rear panel and the front panel.

 

[wolfram23]

snip

Looks good! What case is that? For a smallish case it can fit a lot of radiator!

 

[lowjack989]

SilverStone TJ07

To be more exact, the silverstone TJ07 project actually named "Murdermod" by Charles H. The project has been discontinued for some time now but he has been working on a second case as a successor to the case style seen in my build. The mod replaces the top panel, midplate, rear panel and the front panel.

Thank you for clarifying that for me Cyansnow

 

[Motopsychojdn]

@Mikol, resize please dude, some folks are on phones or slower connections and huge pics are too much
Moto

 

[mikolrayne]

@Mikol, resize please dude, some folks are on phones or slower connections and huge pics are too much
Moto

Omg sorry, I forgot to resize the photos. Didn't realize the pictures were that huge. Done!

 

[mikolrayne]

Looks good! What case is that? For a smallish case it can fit a lot of radiator!

Haha, thanks! It's a Raven Silverstone RV03. I'm honestly also pretty amazed with this case, there's actually still enough space for a 240mm radiator at the bay drives area.

 

[Motopsychojdn]

Thats better, I can see them now and pick away hehe
Bit of tidying to do but nice enough man,
swap one of the crossfire bridges over so they both face the same way,
Sleeve or tape up the bare wires and otherwise pull them tight to minimise what you can see of them,
Straighten those stickers up,
and is that cling film behind the pump?
Hehe, OCD and galleries don't mix lol
Moto

 

[mikolrayne]

Thats better, I can see them now and pick away hehe
Bit of tidying to do but nice enough man,
swap one of the crossfire bridges over so they both face the same way,
Sleeve or tape up the bare wires and otherwise pull them tight to minimise what you can see of them,
Straighten those stickers up,
and is that cling film behind the pump?
Hehe, OCD and galleries don't mix lol
Moto

Good points. Will do something about it!
Regarding the pump, that's glue from a hot glue gun.
The top leaks, and changing the o ring doesn't help so I just glued it to stop the leaking.

 

[Motopsychojdn]

Np man, I thought it may have been hotmelt glue but wasn't sure
Moto

 

[cyansnow]

updated:

taken with a friends borrowed SLR

taken with my phone

taken with my phone

 

[lowjack989]

Very clean looking...Cyan

 

[mikolrayne]

Hey all,
Found some time to tidy my case, add my new rad and got new fans. How does it look now?

Edit: Please ignore the red SATA cable. Got to pick up a longer one to loop through the back of my case.
Also, the second PCIE cable for my GPU was a failed attempt at cable sleeving, thus the scotch tapes around it. Will get it replaced soon.
Lastly, the fan cables right at the back are extremely messy. Didn't want to drill 3 separate holes for the 3 different fans. Any suggestions?

 

[Motopsychojdn]

Tidy....er
The three fan wires, rotate the fans so the cables are at the other side, maybe feed them through a spare Pcie slot?
They'll be hidden from view by the rad then,
or send it to me and give me a week
the problem is you have a lot of stuff there and its a back to bones job to really get the best, not impossible though
**Forgot I'd done this guide...
http://www.tomshardware.co.uk/forum/322532-13-tidy-wires-radiators
it may halp a little in your struggle **
Moto

 

[Devastater6194]

Hey all,
Found some time to tidy my case, add my new rad and got new fans. How does it look now?
http://img855.imageshack.us/img855/4654/dsc0138ek.jpg
http://img844.imageshack.us/img844/5780/dsc0142ed.jpg
http://img827.imageshack.us/img827/9118/dsc0141ea.jpg

Edit: Please ignore the red SATA cable. Got to pick up a longer one to loop through the back of my case.
Also, the second PCIE cable for my GPU was a failed attempt at cable sleeving, thus the scotch tapes around it. Will get it replaced soon.
Lastly, the fan cables right at the back are extremely messy. Didn't want to drill 3 separate holes for the 3 different fans. Any suggestions?

Man that case looks hectic/cramped. Wanna fit anything else in there???