Archived from groups: microsoft.public.windowsxp.hardware (
More info?)
One the drive inside of the external casing, you set the jumper with the
little peice of plastic on the pins in the back of the drive. There
should be a label or image on the drive that shows what pins need to be
connected to make the drive Master, Slave, or Cable Select.
----
Nathan McNulty
bailey wrote:
> Hi, how do you set the jumper ?
>
> "angeloabba" wrote:
>
>
>>Just an update, I got it woking. This will probably sound stupid but I
>>emailed Swann support and all I had to do was set the jumper on the drive as
>>a master. I didn't even think of doing that. Well as soon as I did that bingo
>>it worked.
>>
>>Thank you to all for the support.
>>
>>Cheers
>>Angelo
>>
>>"stu8975" wrote:
>>
>>
>>>i figured out what is causing my prob..i have a printer (epson r300) which
>>>has a build in card reader which is classed as having removable
>>>storage...what usb devices do you have connected? install them one by one
>>>then watch the in the bottom right corner ( add hardware symbol),it will show
>>>which one is causing the prob..well thats how i discovered out which device
>>>it was..
>>>good luck
>>>
>>>"Angelo" wrote:
>>>
>>>
>>>>Well as much as I would like to have come on here and say
>>>>it worked it didn't. I still have the same problem and
>>>>same error. I'm stumped I don't know what else to do...
>>>>
>>>>Thanx for your suggestion Nathan
>>>>
>>>>
>>>>>-----Original Message-----
>>>>>Thanx Nathan
>>>>>I'll give it a try and update everyone. Thanks for the
>>>>>suggestion. Here goes........
>>>>>
>>>>>Angelo
>>>>>
>>>>>
>>>>>>-----Original Message-----
>>>>>>Here is what I would like you to try. Unplug your USB
>>>>>
>>>>>Devices (Except
>>>>>
>>>>>>mouse and keyboard), remove ALL of your USB devices and
>>>>>
>>>>>controllers
>>>>>
>>>>>>(under the USB section) from Device Manager (Start-Run-
>>>>>
>>>>>Devmgmt.msc).
>>>>>
>>>>>>Install the latest chipset (motherboard) drivers for
>>>>>
>>>>>your computer. If
>>>>>
>>>>>>you have a difficulty finding them or finding out what
>>>>>
>>>>>motherboard you
>>>>>
>>>>>>have, use Everest Home from www.lavalys.com . It
>>>>
>>>>should
>>>>
>>>>>provide a link
>>>>>
>>>>>>to your drivers under the chipset section too. After
>>>>>
>>>>>installing these,
>>>>>
>>>>>>reboot. Now before plugging in your devices, we are
>>>>>
>>>>>going to remove the
>>>>>
>>>>>>old keys for them. This may be something you are
>>>>>
>>>>>uncomfortable with, if
>>>>>
>>>>>>that is the case, just try plugging the devices back in.
>>>>>>
>>>>>>This part is for removing the history of your USB
>>>>>
>>>>>devices. Open the
>>>>>
>>>>>>Registry Editior (Start-Run-regedit), navigate to this
>>>>>
>>>>>folder:
>>>>>
>>>>>>HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\USB
>>>>>>
>>>>>>Now expand each of these Vid_Xxxx folders and look for
>>>>>
>>>>>the ones
>>>>>
>>>>>>containing information about your USB devices that are
>>>>>
>>>>>not working.
>>>>>
>>>>>>Once you find them, right click on the folder starting
>>>>>
>>>>>with Vid_Xxxx
>>>>>
>>>>>>that contains information about them in it and delete
>>>>>
>>>>>the folder. After
>>>>>
>>>>>>removing all of the folders that contain information
>>>>>
>>>>>about devices that
>>>>>
>>>>>>you are experiencing problems with, reboot, then plug
>>>>>
>>>>>the devices back in.
>>>>>
>>>>>>----
>>>>>>Nathan McNulty
>>>>>>
>>>>>>
>>>>>>stu8975 wrote:
>>>>>>
>>>>>>>its annoying aint it?...do you have very slow start
>>>>
>>>>up
>>>>
>>>>>when you turn your pc
>>>>>
>>>>>>>on? like takin 5 mins to get to the log on screen?
>>>>>>>
>>>>>>>"angeloabba" wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>I'm having the same problem with my usb hd, I've
>>>>>>>>unplugged all other usb devices I can execpt my mouse
>>>>>
>>>>>and
>>>>>
>>>>>>>>keyboard and still happens I've tried the suggestions
>>>>>>>>below and no luck, anyone else have any suggestions?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>-----Original Message-----
>>>>>>>>>hi ,no this doesnt apply or remedy the prob as it
>>>>
>>>>was
>>>>
>>>>>>>>present before sp2 was
>>>>>>>>
>>>>>>>>
>>>>>>>>>installed???
>>>>>>>>>
>>>>>>>>>"Kevin" wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>Does either of these apply to you:
>>>>>>>>>>http://support.microsoft.com/default.aspx?
>>>>
>>>>scid=kb;en-
>>>>
>>>>>>>>us;870893 or
>>>>>>>>
>>>>>>>>
>>>>>>>>>>http://support.microsoft.com/default.aspx?
>>>>
>>>>scid=kb;en-
>>>>
>>>>>>>>us;873169 ? Both deal
>>>>>>>>
>>>>>>>>
>>>>>>>>>>with WinXP SP2 and USB problems.
>>>>>>>>>>
>>>>>>>>>>"stu8975" <stu8975@discussions.microsoft.com> wrote
>>>>>
>>>>>in
>>>>>
>>>>>>>>message
>>>>>>>>
>>>>>>>>
>>>>>>>>>>news:B378E051-D92A-4BE0-9B92-
>>>>>>>>
>>>>>>>>1EA3903F549D@microsoft.com...
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>hi,in device manager,my usb 2.0 mass storage
>>>>
>>>>device
>>>>
>>>>>>>>has a yellow symbol
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>with
>>>>>>>>>>>! in it,it says the device cannot start properly
>>>>>>>>
>>>>>>>>(code 10),i have tried
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>unistalling it and reinstalling it,it says there
>>>>>
>>>>>was
>>>>>
>>>>>>>>a problem with the
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>istallation and it might not work properly,tried
>>>>>>>>
>>>>>>>>updating/rollback etc of
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>the
>>>>>>>>>>>drivers,but none of this works...help.. all hd's
>>>>>
>>>>>etc
>>>>>
>>>>>>>>were preinstalled
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>when i
>>>>>>>>>>>bought the pc,i have all the lastest updates etc
>>>>>
>>>>>inc
>>>>>
>>>>>>>>service pack,but this
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>prob was present prior to installing them..my pc
>>>>
>>>>is
>>>>
>>>>>>>>a medion powerplus
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>3200+
>>>>>>>>>>>(xp he,amd athlon xp 3200+,160gb,512ram)..also im
>>>>>>>>
>>>>>>>>unsure if this is
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>related
>>>>>>>>>>>but,upon start up of my pc,it seems to stick on
>>>>
>>>>the
>>>>
>>>>>>>>first screen(the one
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>with
>>>>>>>>>>>all tech details- processor/memory etc) for about
>>>>
>>>>3-
>>>>
>>>>>>>>4 mins(only shows the
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>first 4 lines of info from top of screen
>>>>>>>>
>>>>>>>>immediately),then goes fine then
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>goes to a blank screen after the win xp screen for
>>>>>
>>>>>1-
>>>>>
>>>>>>>>2 mins then finally
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>get
>>>>>>>>>>>to the log on screen??????? help
>>>>>>>>>>>--
>>>>>>>>>>>thanks
>>>>>>>>>>>stu8975
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>.
>>>>>>>>>
>>>>>>>>
>>>>>>.
>>>>>>
>>>>>
>>>>>.
>>>>>
>>>>