Vcore problem ?

[Guest]

System:
Athlon T-bird 1,33 GHz (not overclocked - yet)
ASUS A7A277 (ALiMAGiK)
Silverado Noise Control working at 12 V (directly connected to the Motherboard
ASUS Geforce3
256 MB ram PC2100

I have some problems with cooling my CPU properly -
CPU temp 63C (both on 100% cpu load and on 0% CPU load)
Mobo temp. 33C
ambient temp. 22C


Asus probe says Vcore is 1.85 but in Bios setup I have set the Vcore to 1.75 and that is the
lowest I can set it on.

Is it a big problem for the temperature that Vcore is running on 1.85, and if it is, what can
I do to lower the Vcore to 1.75 ??


Tresor

 

[MeTaLrOcKeR]

Make sure u didnt fill in the wrong bridges on the CPU (Instead of fillign in the L1 bridges maybe you filled in the L7 ?? I dunno really) But make sure its done properly..
for a Silverado noise control HSF even at idle or full load and 1.85VOLTAGE..60c is TO HIGH....
did u take the piece of tape off the bottom of the Sink ?

maybe ur Jumpers for Vid (VCore) settinsg are wrong....check it all...

-MeTaL RoCkEr

AMD = Always Making Dough... =)