Question Why is my RAM speed still shown as 2133Mhz when I OC'd it to 2400Mhz in the BIOS ?

[keith01]

My PC Specs:

https://imgur.com/a/Lf1DD0j

View: https://imgur.com/a/Lf1DD0j

 

[CountMike]

https://imgur.com/a/Lf1DD0j

View: https://imgur.com/a/Lf1DD0j

That shows nothing about RAM, show us Memory and SPD tabs. I doubt it could even reach 2133MHz on that CPU let alone 2400.

 

[keith01]

https://imgur.com/a/Lf1DD0j

View: https://imgur.com/a/Lf1DD0j

That shows nothing about RAM, show us Memory and SPD tabs. I doubt it could even reach 2133MHz on that CPU let alone 2400.

Memory

https://imgur.com/a/Mk9hVmK

View: https://imgur.com/a/Mk9hVmK


SPD

https://imgur.com/a/JsZnLYy

View: https://imgur.com/a/JsZnLYy

View: https://imgur.com/a/Mk9hVmK

 

[SkyNetRising]

Why is my RAM speed still shown as 2133Mhz when I OC'd it to 2400Mhz in the BIOS ?

Probably didn't save the settings.
Show your BIOS screens with dram settings.

 

[keith01]

Probably didn't save the settings.
Show your BIOS screens with dram settings.

uhmm here.. sorry if bad quality

https://imgur.com/VudIF6V

View: https://imgur.com/VudIF6V

save&reset

https://imgur.com/a/hhqjkKr

View: https://imgur.com/a/hhqjkKr
DRAM

https://imgur.com/a/K8seuxM

View: https://imgur.com/a/K8seuxM

Manual Memory Timings

https://imgur.com/a/b57Rmci

View: https://imgur.com/a/b57Rmci

 

[SkyNetRising]

Here. Change Memory Clock value.

 

[keith01]

Here. Change Memory Clock value.

I already did this I saved it on 2400mhz and when I checked it on task manager and CPU-z it only shows 2133mhz

 

[hotaru.hino]

Leaving the timing values at 0 might have something to do with it. My guess is leaving it at 0 either means the motherboard says "well you didn't define something here so I'll revert it to its defaults" or it actually tried running RAM with 0 timing values, failed, and reverted it to defaults.

Unfortunately I don't know what values to input here (CPU-z gives you some of them, but not all of them).

 

[SkyNetRising]

Leaving the timing values at 0 might have something to do with it. My guess is leaving it at 0 either means the motherboard says "well you didn't define something here so I'll revert it to its defaults" or it actually tried running RAM with 0 timing values, failed, and reverted it to defaults.

Good catch.
Memory Timing value should be set to Automatic (not manual).

 

[keith01]

Leaving the timing values at 0 might have something to do with it. My guess is leaving it at 0 either means the motherboard says "well you didn't define something here so I'll revert it to its defaults" or it actually tried running RAM with 0 timing values, failed, and reverted it to defaults.

Unfortunately I don't know what values to input here (CPU-z gives you some of them, but not all of them).

This wasn't saved as manual. I only took a picture for a moment and change it back to auto.

 

[Bob.B]

This wasn't saved as manual. I only took a picture for a moment and change it back to auto.

Just for yuks move the ram stick to the other slot see if it makes a diff.