Question WIFI loses connection after some minutes working

[chrisWWWW]

Hello,
My wifi disconnects and I need to relaunch the wifi connection to make it work again it could happen every 5 minutes, every 1hour. I just sometimes lost my connections.
How to improve it?
I am using NetworkManager, maybe you suggest to use some other alternatives, which ones?
Maybe change network driver to another one, or update this one how to achieve this? I have reinstalled using:

Kernel: 6.4.6-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.1.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.4-x86_64
root=UUID=758df14c-2163-4fe3-a0db-2a38fe4278d3 rw amd_pstate.enable=1
amd_pstate=guided iommu=pt amd_pstate=active amd_pstate.shared_mem=1 quiet
splash initcall_blacklist=acpi_cpufreq_init amd_pstate.enable=1
amd_pstate=guided iommu=pt amd_pstate.shared_mem=1 apparmor=1
security=apparmor udev.log_priority=3
Desktop: GNOME v: 44.3 tk: GTK v: 3.24.38 wm: gnome-shell dm: GDM v: 44.1
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: HP product: HP Pavilion 15 Laptop PC v: N/A
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: HP model: 88D0 v: 78.31 serial: <superuser required> UEFI: AMI
v: F.23 date: 10/05/2022

Network:
Device-1: Realtek RTL8852AE 802.11ax PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtw89_8852ae v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 02:00.0 chip-ID: 10ec:8852
class-ID: 0280
IF: wlo1 state: up mac: <filter>

2: wlo1 >
Link File: /usr/lib/systemd/network/99-default.link
Network File: n/a
State: routable (unmanaged)
Online state: unknown
Type: wlan
Path: pci-0000:02:00.0
Driver: rtw89_8852ae
Vendor: Realtek Semiconductor Co., Ltd.
Model: RTL8852AE 802.11ax PCIe Wireless Network Adapter
Alternative Names: wlp2s0

++

sudo /sbin/iwconfig wlo1  127 ✘
wlo1 IEEE 802.11 ESSID:"W-HUAWEI-B535-6518_5G"
Mode:Managed Frequency:5.32 GHz Access Point: A2:08:3A:18:65:80
Bit Rate=400 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr😱ff Fragment thr😱ff
Encryption key😱ff
Power Management😱ff
Link Quality=59/70 Signal level=-51 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:84 Missed beacon:0

My Invalid misc constatly increases.
I am using 5GHz internet.
Is it a interferance problem, how to solve it?

My last topic what I use for my connection:

Question - How to connect two routers to one internet?

How to connect two routers to one internet? I recently got internet with a primary router already connected and functioning. From the primary router, an RJ45 cable is connected to the LAN1 port of a second router. However, I'm having trouble setting up the second router. I've disabled DHCP, but...

forums.tomshardware.com

I have read this:

Why Your Wi-Fi Sucks And How It Can Be Helped, Part 1

Our reliance on Wi-Fi networks is exploding. But the more popular 802.11n gets, the more it seems prone to performing poorly. In this first of two parts, we explore exactly how clients and access points communicate and, well, why your Wi-Fi sucks.

www.tomshardware.com

 

[Ralston18]

Update your post to include full system hardware speds and OS information.

Make and model information for: modem, router, or modem/router (if combined).

You mentioned two routers - how are they connected? What ports are being used?

On your computer run "ipconfig /all" (without quotes) via the Command Prompt.

Post the results. You should be able to copy and paste the results without needing to retype it all.

Also look in Reliability History/Monitor for any error codes, warnings, or even informational events that occur/occured just before or at the time of the wifi disconnects.

 

[chrisWWWW]

I had to test some more approach.
I have delete drivers and install it one more time and update entire system one more time.. 🙄

sudo modprobe -r rtw89_8852a

sudo modprobe rtw89_8852a

greetings

 

[Ralston18]

I am not a Linux person (full disclosure) but my sense is that what you did resolved the problem.

I.e., deleted the drivers and reinstalled the drivers again....

Is that correct?

 

[chrisWWWW]

Correct, but also update system, libs, everything I could to the latest state.
Setup router to static options like bandwith, only 5g internet without let system choose between 2.4 or 5 etc.