Question Will I be able to move a T7400 Motheboard to a new case?

[RealBenHoward]

Hi Guys, I have a t7400 and I have made a few fair upgrades on it but now want to move it into a new case, I belive its a full atx but there are 2 cpus that need cooling and the ram needs cooling as it is FB-DIMM- ram, would i just be able to move it into a new atx case or what?

 

[Dark Lord of Tech]

Also the case panel pinouts are different.

 

[maxamillionfeettall]

I recall that its e-atx, not just regular atx. The front panel is different, so you'd either need to fit the old front panel in a drive bay or something, or just deal with pressing f1 on every boot with only power button connected.

 

[RealBenHoward]

so if i purchase an e-atx case and fit it all it should be fine because i recall they need a lot of fans for ram and cpus

 

[maxamillionfeettall]

I'm a bit concerned about the length of the board, e-atx is 12"x13". If you can measure to see if its 12" at that weird bit on the right side vertically, the part that is lower, if so, you should be fine. The mounting points look similar to standard e-atx but i can't guarantee.

 

[RealBenHoward]

Its 12inch High and 13inch wide

 

[maxamillionfeettall]

Then you should be golden, make sure the case has removable standoffs just in case some of the standoffs don't align, but from the layout, seems most should. Should fit any e-atx case i hope, now just have to deal with the front panel/power button.