The error code for this was 0xc0000221. I've re-installed window 10 multiple times, even wiping my hard drive entirely, but after a while I keep getting this error.
if you keep having boot errors, I would look at your boot drive as possible cause since it keeps corrupting windows.
Are you still using 2 sets of ram that reset the timings? Perhaps only use one set and see if that helps (reference link)
As mismatched ram can cause errors. And corruption
I only know that as I went through recent posts looking for specs.
CPU - 2700X
the rest is a mystery. Found a build from Aug but have to assume that didn't happen?
I ran the memory test and there were no errors with all the ram. I think it's because there being 2 different installed ram because whenever I had all of them installed, it would occasionally reset its speed to 2133. Also, after I removed the two different ram, I don't think I got any blue screens yet.I think this has tests for the drive - https://www.crucial.com/support/storage-executive
problem with many ssd tests is they just see the speed, not the health
I doubt its the hdd but what brand is it? Might as well test it as it could be cause.
2x different sets could be cause of corruption as well.
Try running memtest86 on each of your ram sticks, one stick at a time, up to 4 passes. Only error count you want is 0, any higher could be cause of the errors. Remove/replace ram sticks with errors. Memtest is created as a bootable USB so that you don’t need windows to run it