Recent content by mihaisoroiu05

I bought the rx 6500 xt because it's cheap, but it doesn't have and encoder and the cpu isn't that great at it either. My question is, If i connect my old gpu through a riser x1 to x16, does the second gpu have to be connected to a monitor to encode video? Specs: CPU: R5 1600 GPU1: RX 6500 XT...

the specs in the apps made me forgot how bad this card's memory is😬

i reinstalled the gpu, it did the click and i checked to see if it's fully inserted after i put the screws. I think is inserted correctly

I know this problem has been pointed out a few times, and that there isn't much of difference between x4 and x16, but it's something that really bothers me. I tried reseating the gpu, blow the dust (compressed air), updated the bios, drivers, bios settings but nothing worked. Specs. R5 1600 Rx...

First off all i typed the title like this so it will be short [Mod -- thank you. Many posters try to fit an entire book in there!] I recently bought the Logitech G102 (mouse) And installed the G Hub software... After i set the rgb lighting and stuff, i moved to sensitivity, at the bottom of...

I have a fairly cheap microphone Trust gxt 212/mico I know it can be just beacouse the mic is bad, but i have friends that have worse mics and those don't do that I set my mic from obs and discord to pick sound only under 32dcb and now i can't be heard , when i set it at 40dcb i can speak...

Fond no setting for power in the monitor settings I set everything I could on high power usage/best performance

You mean the monitor ? I will check that tomorrow (now is 23:41) thanks

PC specs R5 1600 RX 560 4gb (the good version) 16gb RAM B450M-S2H Zalman leii-700 700W So, in almost any game that I am playing it has to lag, and I mean a lot, ex. : CSGO (lowest settings) 170FPS=lag GTA V (lowest settings) 80+ FPS= almost like playing from my phone(if you understand)...

Yup one of the sticks is the problem thanks

Still on the same problem

I just changed my RAM from 4GB to 16GB The pc works fine but sometimes the monitor shows "no signal" then black screen and the monitor is fine again After some time this happens again Any ideas ? Specs CPU : R5 1600 GPU: RX 560 4gb PSU: Zalman leii-700 (700W) RAM: Corsair vengance lpx 16gb 2x8...

I have a GA-B450M-S2H And on the memory support list i cannot find those sticks Corsair Vengeance LPX DDR4, 2x8GB, 2400 MHz, CL 16 It should be compatible looking at the specs and i don't know what to do. Any idea ?

I think i will just put in another 4Gb of ram :)) thanks

Full clean install of windows 10 pro PSU: Zalman leii-700 (700W) The drivers are updated But i need to check the temps Last time i checked they were arround 30°C to 70°C