DDR4

I have 16 gigs of DDR4 RAM installed in my PC. My computer usually only detects 8 gigs when I use it. The problem gets weirder. I entered the bios to check if any of the memory settings may have been messed up (none were) and I rebooted. Now my PC detects 16 gigs again. Problem solved right? I...

Which is the best ram according to CAS Latency? 1.G.Skill Ripjaws V 4GB DDR4 2400 BUS CAS Latency 15-15-15-35-2N 2.Corsair Vengeance LPX 4GB DDR4 2400MHz CAS Latency 16-16-16-39 3.Team Elite Plus 4GB 2400MHz DDR4 CAS Latency 15-15-15-36

Normally DDR4 2400 Mhz single stick ram runs at 2133 mhz speed. I know 2133 mhz is a stable speed until I turn on the xmp profile to speed up it to 2400 mhz. But my question: Does every DDR4 2400 Mhz single stick ram run at 2133 mhz speed in every motherboard?

I have a Lenovo IdeaPad 320-15IKB laptop which came with 8gb of ram but suddenly it shows 4gb of ram. I tried rebooting and stuff but nothing happened. I contacted the Lenovo online cc and they said me to reset my BIOS to default and it should work. It did. But it was just for that specific...

Hello, I have a question. So right now I have 8GB DDR4 2133MHz CL15 DIMM RAM, I'm trying to mix it with 8GB DDR4 2400MHz CL16 DIMM RAM, they are both from the same company (Team Group Elite). My motherboard can support them of course. Will it work ? Thanks.

The RAM I bought and am using: https://www.gskill.com/product/165/166/1536654268/F4-3200C16D-16GTZRTrident-Z-RGBDDR4-3200MHz-CL16-18-18-38-1.35V16GB-(2x8GB) The RAM I probably should've gotten: https://www.gskill.com/specification/165/167/1536718509/F4-3200C16D-16GTZRX-Specification My PC's...

Hey guys, I recently switched to AMD from my i7 4790K, I did a lot of research and bought the following: - Gigabyte X570 Aorus Master - AMD Ryzen 7 3700X - G.Skill Ripjaws V 3600MHz Cl16 (F4-3600C16D-16GVK) I set XMP to Profile 1 and all looks well and the PC worked without any...

Hello, I am getting a new laptop, my old laptop is current on the older ddr3 generation for memory and a I5 4200U. I'm deciding whether to get 8 or 16GB. I'm browsing the web for these newer Mid / High Range laptops with the new 10th Gen, previous 9th, 8th, and AMD Processors. Most seem to...

I currently have 2x4gb of Crucial Ballistix Sport LT 2400 DDR4, https://www.amazon.com/Crucial-Ballistix-Desktop-Gaming-BLS2K4G4D240FSB/dp/B00UFF7Y72?th=1. It has 16-16-16 timing with a voltage of 1.2V. I am looking to upgrade my RAM, but the identical model of my current RAM is currently...

Hello, im working on my first PC and im trying to upgrade it. It was bought as a prebuilt some time ago and it still runs ddr3 and the AMD FX-(tm) 6300 processor.eventually I will upgrade all of this but for now I can only do the motherboard and ram. So my question is, will I be able to use this...

Hi! I have a MSI B360 Gaming Plus motherboard and with a i3-9100f and I need a good RAM. Would be the TeamGroup DDR4 3200 16GB T-Force Delta RGB compatible and good? (F4D416G3200HC16CDC01 ) Or what would you recommend?

Hello, I Have a MAXIMUS HERO XI MB and 2 x Corsair Vengeance PRO 8gb 2666mhz ram and 2 x Corsair Vengeance PRO 16gb 3000mhz Ram I currently have them set up like this; DIMM A1 -16GB 3000mhz DIMMA2 - 16GB 3000mhz DIMMB1 - 8GB 3000mhz DIMMB2 - 8GB 3000mhz is this the best way to have them set...

Hello, im trying to upgrade my Notebook and one thing i want to do is replace or add some RAM . Im have a MSI MS-16J4 Motherboard with single channel ddr4 RAM 8 GB (Speed 2132). I want to replace it with 2x8gb DDDR4 RAM (Speed 2666). HWinfo is showing me that my max. speed is 1300? And it...

Guys i really need help , i have an ssd m.2 ddr3 motherboard gigabyte i5 3470 So i.bought a new pc which is motherboard z170 , i have.an ssd m.2 in my i5 3470.motherboard which is ddr3 , well i tried to put.it.on.my z170 ddr4 motherboard , but i cant , the stick in of the ssd , is bigger than...

Ok so I am trying to overclock my Ram using the Ryzen DRAm calculator and am trying to find out some information about my kit. It is a Corsair Vengeance LPX 16GB (2x8GB) CL16 kit. CMK16GX4M2Z2933C16 ver 4.32 I actually already know half the information, it is using Samsung DRAM chips according...

Hello i have a b250m ds3h gigabyte mobo which have 4 slot for rams but supports only dual channel .I currently have 2x4 gb ram and j want to put another 2x4 so as to have 16gb.Will the 4 sticks work good or will i lose performance and what channel will work with 4 sticks.

Hi, Planning to upgrade, but im curious if the following will fit for Z490-F (ASUS ROG) ddr4 hyper x 8gb ram (2666mhz) kraken x63 1080ti thoughts?

Specs : Ram : Corsair vengeance LPX 8GB DDR4 2666mhz Motherboard : TUF H370 pro-gaming (latest bios update) While going through bios settings I noticed that this whole time the ram has been running on 2400mhz. So I went ahead and switched it to 2666mhz in my XMP profile and after a save and...

Hi. I have an Omen laptop with the following relevant specs: 16GB ddr4 SDRAM 2666 1.2v [2 sodimm slots] i7-8750H @ 220ghz 9mb cache 6 core Nvidia GTX 1060 6GB GDDR5 I have done some search via command prompt and looked into the registry and found out that the brand of the RAM stick is SK...

I realised there are little differences between these 2 motherboards, which is more worth it? Intel i7 8700 (non K) RTX 2060 2666MHz RAM

Hello, I am currently stuck trying to figure out which motherboard I should choose. Some people say B360 is better, but then others say Z370 is better. I've got an Intel i7 8700 non K CPU, and RTX 2060. I am not planning on upgrading my CPU any time soon, but I would like to have memory...

Hi everyone, I am trying to activate XMP on my computer through the UEFI interface however I get the error saying that the "previous overclocking settings have failed". Sorry for the long post but I do believe that "devil's in the details", so here is some context to the issue: I had this...

I'm about to buy ram for an i5 9600k but it says the that it only supports 2666hmz. Does that mean I can't use 3600 when the motherboard says it supports it?

As above stated I got some new 32GB kits of corsair vengeance rgb kits.. I turned system off unplugged power. Removed my current GSkill kits and replaced with the new kits. my mother board b450 tomahawk max , cpu ryzen 2600x .. anyways I took the old kits out and replaced with the new. my...

I just recently upgraded to a Ryzen 5 1600 AF and ASrock b450m-hdv r4.0. The switch worked great and everything! I thought let's go ahead and upgrade the RAM as well. So I bought 2x 8gb of 3000mhz RAM. I powered off my computer switched the RAM and everything looked fine until I saw it was...

Hello! I am writting this because I want to know if it's possible to upgrade and keep the current RAM. So one PC1 has the following specs: CPU: i5 8400 MOBO: ASUS PRIME Z370-P RAM: CRUCIAL 8GB DDR4 2400 CL16 1.2V I would like to know what has to be the same about a RAM to be compatible? Or...