motherbaord

I saw a couple of pc building videos and they have mentioned something about updating your BIOS. I've googled it and some people say that you should just update it, another group of people says that if there isn't a fix that you need there is no reason to update it. So I wanted to ask if I...

Hey, i was looking at building a new pc and just wondering if these parts are good together or is their another option cheaper/better? https://pcpartpicker.com/list/P7mHXv

Hello, I was planning to upgrade from the Gigabyte AB350m D3SH to the ASUS Tuff b450m Gaming Pro S. I saw that the motherboard has no reviews or any drivers/bios download support whatsoever. First of all, did this board get released fairly recently? I still really like the board and I would...

No display

Cpu-Z frequency: 798.4 Mhz (DDR4-1596) Its ddr4 3200mhz ram and only running at idk... I enable XMP profile 1 like a guy told me on a forum and still running slow?

i just bought a new motherboard and i dont know if it has a bios verison, because i bought it as a BULK version and what i read is that it doesnt came with any softwere. so im wondering if this thing is even going to work or not?

So I was trying to clean off this part of the motherboard and accidentally scratched it with my nail. Are there any solutions or products I could buy to fix this? Any suggestions would be appreciated 😊

I have an asus m5a78l-m/usb3 with a amd fx 4130 cpu, looking for a substantial upgrade but all the better cpu's i can find are either outrageously expensive or out of stock. could anyone help me find the best possible cpu for my asus m5a78l-m/usb3? i'm thinking i may just have to upgrade to an...

My old pc got burned with a energy discharge... And I remembered that I have an old pc of these specifications: GA-G41M-Combo -Motherboard Pentium Dual-Core e5500 -Processor 8 GB Ram Unknown -Ram CX750M -PSU The problem I have is that when trying to put...

Working on a Predator G3-710 computer from a guy I know who is having issues with it. The issue right now is that when the power button is pressed nothing happens, it doesn't turn on and shows no signs of life. I figured it must be the power supply so I swapped it out with a known good power...

Hello there, MOTHERBAORD: asus x570 pro GPU: gtx 1050 ti CPU: amd ryzen x3900 32 gb 3200mhz Recently bought the assus x570 pro and installed windows 8 onto it. I want to upgrade it to my windows 10 i had on my old pc wich i reset, but i need internet to do so. I cant install the internet...

Hey, there is a long time I don't check what's new about hardware, and I would like to ask for some help to find a motherboard that covers my needs. Purpose: Work / Virtualization(Docker) / Image Editing / Games Motherboard needs: ATX / Tower CPU Socket Type: AM4 (Ryzen 5 3600 processor)...

Hi just wanting to know what CPU i can upgrade to Operating System Windows 10 Home 64-bit CPU Intel Core i5 7400 @ 3.00GHz 47 °C Kaby Lake 14nm Technology RAM 8.00GB Single-Channel Unknown @ 1197MHz (17-17-17-39) Motherboard Manufacturer HP Model 82F1 (U3E1)...

I am planning on upgrading my PC again , this time I am in need of a better GPU and I have never had an SSD so I've been looking into different SSDs recently. I really like the look of the WD Blue SN550 PCIe NVMe SSD and I found some things said about old motherboards not supporting booting from...

Just built two setups. The first one seems to be running fine. The second, not so much. System Specs Gigabyte x570 Aorus Master Bios version F11 G skills Trident Z Neo DDR4 32 GB (installed in slots 2/4) Ryzen 3900x CPUT ROG STRIX GEForce RTX 2080 TI OC Seasonic 1050W Gold PSU Be Quiet Dark...

I have a gigabyte x570 pro wifi and I recently took my pc apart as it needed a deep clean so I set the mb cpu and ram package aside, cleaned then reassembled. I went to turn the pc on nothing, no lights on gpu/my. I was thinking power supply but tested with 2 different working ones and still...

I have a problem with hp 840 g3 motherboard, here is a video link where everything is explained, View: https://youtu.be/xxaAamjW5Js I have multimetar and i have 19.5v main

I have a old X58 motherboard and it originally came with a I7-920 and it worked completely fine with that cpu. But that cpu has a limit at 24 gigs of ram so i wanted to upgraded to a Xeon 5630 which allows for up to 288 gigs. And this is where my problems started I tossed the new cpu in and it...

I recently shipped a desktop across the country through UPS. They packed it, and when it arrived it didn’t appear anything was broken but a ton of motherboard screws had come loose and a few of the power cables to various components had been pulled out (including latched ones like the ATX 24...

i am planning to buy the b450 pro vdh max with ryzen 5 2600 cpu. i have recently come across some threads discussing issues of backward compatibility in new bios update in MSI motherboards. So, i was wondering whether i will face the same problem with the cpu compatibility with the latest bios...

Hey hey, people. So I got a bit of 2 noob-ish questions (as the title of this post suggests) regarding an upgrade I plan to do this weekend with my brother. For a few years now I've been stuck with an AMD FX-8350 CPU with Corsair Vengeance RAM and using a Gigabyte 990FXA-UD3 R5 MoBo for my...

Please help.... So my keyboard will work fine for a couple of hours/minutes then the num lock key will start blinking and it won't work. Then I have to unplug it and plug it back in. It will work fine for a couple of minutes then will shut off again. I have tried plugging it in all USB...

How do I update the bios of Afox g31 Mother board?

I just want to upgrade my GPU to 1660 super without changing my current CPU i5-3330 for now (planning to upgrade CPU later) so which motherboard should I buy now as I have B75m-d3h which won't support 1660 card and also it should help me to upgrade my CPU in future (intel or AMD) So suggest me...

Hello, I recently got a new motherboard and case, and I put all of my previous components into the two. Install was a breeze, but when I tried booting up my computer, there were no drives under boot priority despite having 3 drives installed. After some messing around, I got it to see my M.2...

Hi! My motherboard is Asus ROG Z390E and I bought 3 fractal design prismal AL 120 fans for the case (Thermaltake level 20 MT). But I cannot seem to connect the fans because each fan comes with 2 cables, both of which are 3 pin, but the motherboard only has 4 pins fan connectors. What should I...

Hi, so i thought i would upgrade my pc over the holidays, since my old rig had some problems. (one of the memory channels stopped working) But after i had set everything up i ran into some problems which result in constant crashing. What i had before: -16GB (2x 8192MB) G.Skill Value...

Hello all, I have stumbled upon the following problem and hopefully someone here can help me out. My desktop (ATX) PC, all of a sudden, stopped turning on. I moved the PSU cable and heard a small spark which caused my apartment electricity to shut down, causing me to flick the general electric...

I finished my computer a couple days ago and when I tried to plug in a USB cable into one if the ports, I noticed that there was a small piece of metal blocking the port. I say in an LTT video that the fins could stick into the port and short it out. How do I fix the fins? I am having trouble...

Hello, I'm not a native English speaker so I hope I don't make a lot of spelling error. I recently bought PC parts to build my very first PC. After building it, putting it in the case without testing it (yup im dumb) I realised that there was no post, no bios, no beep whatsoever. I tried a CMOS...

Hello, when i open some game i heard a wierd noise coming from the area of the mobo where the graphic cards is located. I did some benchmarks and this noise only occurs at the graphic cards benchmark. I also tested with a different graphic card. Any thoughts on this?

I'm currently using a motherboard that only supports upto DDR4 2133 Mhz memory. I have one 8Gb 2133 stick in single channel installed. I'm experiencing severe stutter issues in multiple games. I was told that using dual channel ram would get rid of the stuttering by a friend who had the same...

Hi Guys, I already have below parts (some new and some from the previous build). I'm looking for suggestions on Motherboard, RAM and PSU. New: Ryzen 5 3600 Samsung Evo 970 M.2 NYMe 500 GB Old: Cooler: Hyper 212X (I will use the stock cooler for some months though) Case: Cooler Master K281...

Hello, I wanna build a storage pc that will run 24/7. What parts would you recommend? Especially the motherboard and Cpu. I need a lot of SATA 6gb/s connectors.

So last night I'm just chilling, doing literally nothing intensive, just watching a youtube video. Suddenly my pc shutoff, as if we had a power outage, except the fact that everything else in my office was still on. When I went to turn the pc back on, it started fine, no odd noises or anything...

I Already Use Win 7 64bit in 2019.... Can My Mobo ITNEL DH67BL (with i5 -2400) Supports Win 10 64bit ? Can Win 10's Driver Support in my ITNEL DH67BL motherboards ?? https://support.microsoft.com/en-in/help/4057281/windows-7-support-will-end-on-january-14-2020

I'm trying to build a pc on a budget, I have been looking around for an answer for this specific mother board... Just want to know if this mother board has built in Wifi: https://www.aorus.com/product-detail.php?p=796 It says "the latest standard WIFI design" not sure if that means it includes...

I just updated to latest bios of the mainboard AM4 A320m Pro VH Plus to 7B07v3GQ Beta. As "Improved boot up time" seemed attractive. However, after doing so, when I enabled XMP and set profile 1 (Frequency 3200Mhz), PC would not boot, blank screen, no signal. So cleared CMOS, instead of enabling...

A couple hours ago I updated my bios because i was experiencing blue screens and bios was the last possible cause. Before updating it when i pressed the on button my keyboard and mouse lighted up and the screen displayed asrock, then windows would come up. After updating, all fans are spinning...

Hi, when you build a pc I know that you have to download drivers from each components website. When I see videos they only download specific drivers. Is there anything wrong with downloading every latest driver if you don't know what some of them are? Thank You