raid

Hi, I'm trying to set up a PCIe RAID Controller into a new GIGABYTE B550 Aorus Elite V2 motherboard that I recently bought, and I'm having the following issue: What's expected? - The BIOS of the PCIe RAID Controller itself must show up first before POST. What happens in my case? - It shows...

Hi All, I recently asked a storage question on the forums related to one of my 4 HDDs (in a RAID 5 array) having some uncorrectable sectors after power loss, and subsequently, needing to replace it. I will more than likely be taking the opportunity to upgrade the storage capacity of the array...

Hi All, I am running Windows Server 2019 Standard on my HP Z640 Workstation, and this morning I noticed that my machine had crashed/rebooted. Looking at the logs, it seems that it was a critical kernel-power error, so it must have been a temporary power outage or issue. per usual in these...

Would this B660 motherboard support RAID of 2x NVME drives? I see under the specs it does support RAID, but I am not sure if it is for SATA drives only or NVME drives as well. https://www.gigabyte.com/Motherboard/B660M-AORUS-PRO-AX-rev-1x/sp#sp

Hello, I have a problem with my Adaptec 2283400-R. It simply will not show up on my computer. I have an Asus PRIME Z490-A motherboard. I have tried switching the slots. The very confusing thing is that the manual states there is a led that should indicate it is working properly "Heartbeat LED -...

I have an Asus Hypercard installed with Samsung 960 Pro Series - 2TB PCIe NVMe - M.2 Internal SSD. It was formatted for RAID and became my C:Drive. It crashed and now I would like to know if it is possible to recover the data?

I want to set up 2 external hard drives as the second mirroring the first (drive F should be a mirror of drive E). I want them to still appear as 2 separate drives and I want the mirroring to take place anytime a change is detected in drive E. How do I set this up so that it is done permanatly?

Hi How to rebuild raid 1? I have a Raid PCI card "ST Lab PCIe SATA 6G Raid card 4channel" and 4 disks connected to it. I'm running raid 1 on two of these with 2 x "16TB Toshiba Enterprise MG08 Series MG08ACA16TE 7200RPM 512MB Ent". The disk are new and have worked for 4 days then I got an alarm...

I am relatively knowledgeable in the PC building space, but little experience. In my new build I want to fiddle around with RAID a bit just for the fun of it. I want a mix of redundancy and increased speed for my hard drives. From what I could find, which most of it is from 6+ years ago, you...

I have a Synology 4-BAY disk station (DS416J) that I want to add more drives to but I'm confused if that's possible. I'm currently out of space on my 8TB RED Drive and I want to add an 18TB red drive to expand the storage. The raid type is SHR. (without data protection.) Is this possible without...

I'm trying to dual boot between windows and Linux mint on my notebook, but every time I go to install Linux mint it says that I need to disable the intel RST technology and switch to AHCI in the bios, but there's a problem, I'm using an NVMe SSD 512 gb M.2 2280 Intel Optane storage. Can I switch...

I am trying to install a PERC 710P into a B560M DS3H V2 motherboard, 10400T CPU. When the card is installed the computer with the default bios settings., it will not boot, I get no bios, or no card bios options. Just a blank screen. I want to run a raid 6 for storage and keep the OS on the...

Thank you in advance for your help. I confess, I know only enough about computers to be dangerous! A friend of mine set up a SuperMicro server for me years ago. I use it for media and file storage. The setup is a Centos 7 OS installed across a 2-SSD drive Raid 1 array, and then I have 4 platter...

I have the following Setup x570 Aorus Master 5900X G.Skill Trident Z 64 GB 3600 CL18 Samsung 980 Pro 2 TB Corsair iCUE 5000X Corsair RMx (2018) 850 W 80+ Gold And I want to upgrade space in order to improve torrenting, I was checking and found that using RAID was a great idea to improve...

Hello, I am working with Windows 10 Laptop that doesn't have a Thunderbolt port. I am looking for a RAID enclosure with the following characteristics: • Diskless - Enclosure only. • 5 Bay Enclosure (SATA HDD) • 10gb USB-C interface (USB 3.1 Gen 2 \ USB 3.2). • Supports at least 14TB per...

Hello everyone, I am making videos for youtube. I record games, upload them to youtube and store them on my hard drive. Youtube keeps the videos, but I feel safer if I still have the videos in case youtube would delete my videos ir was shut down or we are in a war and there is no more internet...

Just upgrading to the ASUS PRIME Z690-P-WIFI D4. I have a set of 4 SATA drives from my old system configured in RAID 10. The UEFI BIOS shows it as a RAID storage and in the firmware update tool it can read from the drive but it does not show up in Windows 10 - not even in the Disk Management...

I know about the risks to be had with RAID 0 and their benefits, but most articles, videos, threads, etc. that I find are from 5+ years ago when things were quite different in the tech world for storage. Also I think most media covering RAID 0 is obligated to talk about it being unreliable, so...

Is it possible to use two NVMe PCIe SSDs in a RAID 1 pair (using Intel RST on the motherboard) as a boot device on Windows 11 (Pro)? The SSDs: Kingston KC2500 1.95 TB Solid State Drive - M.2 2280 Internal - PCI Express NVMe (PCI Express NVMe 3.0 x4) They are working fine as drive D in Raid 1...

Hi folks, I have a few questions around a specific hardware situation. In short: (1) I have an old HDD suspected to be dead and whose data I'm looking to recover if possible, and (2) I'm trying to decide on a storage solution with which to replace it. To preface, I've read the pinned threads in...

Hello, Recently when I turn my computer on it boot cycles once (I believe it's boot cycling, it sort of does a mini restart when loading windows) then comes up with the picture attached. When I press F1 I go into the BIOS, even if I don't change any settings and just save and reset the computer...

Figured someone here might be able to point me in the right direction? I have 2 x 2 TB Seagate IronWolf 2TB NAS drives set up in RAID 1 on a Highpoint RocketRAID 62x SATA Controller. I have had zero issues with it in the last 4½ years and it is currently healthy. They are installed in a Windows...

I have a Dell PE 2950. I have a RAID 50 built with six 600GB drives. The 2019 OS is installed on the RAID 50, on 1 partition. I have a USB 4TB drive connected with my BMR files saved to it. I do rename each BMR as I make it. I am trying to launch a BMR recovery. If I use the 2019 USB OS install...

Good day, As the title says, what is a RAID setup when it comes to storage configuration, I have been reading a lot of about this online but I just can't seem to understand the techy gobbledygook, can someone please provide an answer in "English"? An answer that can be easily understood and at...

Sorry in advance for the long post, but I want y'all to have all the info. It's not like I'm a newbie to this -- been building PCs since the late 1980s. So I've done all of the basic troubleshooting stuff, of course. And all of the advanced stuff I can think of, or glean from a Google search...

I want to setup a 2 disk NAS box. I don't want to do a raid 0, If one fails its all gone. I also dont want to do a Raid 1, I lose half the space. Is there any option to do a raid with 2 disk and distributed parity. The specs im thinking on are below. A 4 bay nas is out of my budget. The current...

I have 3 HDDs for data and an SSD for system all connected to four sata2 sata connectors on my mainboard and I want to add 2 more HDDs whilst two gsata3 sata connectors are available. The manual says those gsata3 connectors are for raid configuration and I dont know anything about raid nor I...

Hello everyone! I'm in the process of deploying a new server (running Windows Server 2019) that I plan to host multiple VMs on. I have a RAID and/or Intel RST related question I was hoping someone could help me with. Before I get too far, let me break down the key storage specs of the server...

My girlfriend is having RAM problems, her Corsair RGB Vengeance 16gb randomly stopped working without being touched, and I can only get it to boot with 1 stick. The motherboard is an ASUS Maximus Hero VIII. On boot, I get a bios error saying to change the SATA configuration to RAID mode. I...

Hey everyone! I'd love to hear some ideas/opinions about what I've got going on as I prepare to deploy a server for the first time, specifically about storage setup I'm looking at storage solutions for my newly purchased (used) HP Z640 Workstation. I got it for $360 with the following specs...

Hi all, Apologies if this is an over done question, but I figured that asking would get me the best info. I have a Seagate 4-bay NAS, currently it is running in JBOD with a 1tb, 4tb, 4tb and 2tb. Totaling to 11tb of space. I recently bought a 6tb and a 3tb HDD that I want to replace the 1 and...

Hello, I would like to know if Windows server 2008 is able to detect that one of the the drives in Raid has failed. If not, is there a way for the Raid to communicate about failure? Beeping or email, anything. I'm using Windows server 2008 Old HP desktop server with ORCA v8.20.60.00 Any help...

HI All, I recently got a Seagate 4 Bay NAS. I am running it in JBOD. I currently have a 1Tb + 4tb + 4tb + 2 tb in it. Everything was running fine until I added the 2tb drive. Now it randomly shuts off after about 10 mins and the only way to turn it on is to unplug it at the wall and plug it...

Hello All! I am new to the forum and would like to get some opinions on different routes I should go. I'll try to keep this condensed as possible without leaving out too many details. I recently started with a company and was tasked with looking over a server that was being looked over by...

So I have two Seagate HDDs, both identical, set up as RAID drives on a Netgear ReadyNAS for backup purposes. It worked great for two years, then recently crapped out. I cannot access the ReadyNAS at all and it may well be that piece of hardware is toast. So I figured I would plug the HDDs into a...

I just built a new computer for a user at work and after building it all the components showed up properly in the BIOS. I set up RAID 1 between two samsung 1TB NVMe SSDs which worked fine but when I tried booting to the Windows 10 install USB it just kept booting to the BIOS. I was trying...

When I did a clean installation of windows, I booted it up with ACHI. Later on I did a repair install when I had an update error and believe I also booted it with ACHI. However, when I went into UEFI settings and put everything to default, I noticed my computer would have a startup repair loop...

I’ll preface this by saying that I’m already aware that SSDs are always faster and sometimes even more economical than HDDs with WRB configured, my purpose for posting this question is out of morbid curiosity. Will Windows 10 and/or 7 allow WRB to be enabled on a USB stick when the OS is...

Friends I have a couple of HP Elite 8200 SFF that are very useful hardy older systems, and I'm needing to add-in a RAID card and was thinking of one of the Dell-rebranded LSI cards - . 2 Questions I can't find clean answers to: in the past, HP has been "one to watch out for" in adding...

I’m currently planning a small long term data archive and I was wondering: are 2 hard drives in RAID 1 more reliable than 1 SSD? No one has really compared these 2 configurations that I could find, so I was wondering if any of y’all have any insight on this. Thanks!