Hello!
I just bought and received the WD My Book Duos in order to use it as a RAID 1 Backup for my Data. To my amazement it has enabled hardware encryption which can't be turned off. This is unacceptable for me as it destroys the whole purpose of RAID1 and data recovery - so i will be sending...
so i installed a new windows on a new SSD on the exact same computer, but my 2 hard disk drives that i had a raid on shows up with a yellow warning triangle in computer management - device manager. i used the bultin way when i partitioned the hard drives
Any tips here? i had trouble finding...
Hello Guys,
I want to upgrade my BIOS Setting but I have a RAID setup with two 4TB HDD's.
How can I make sure that that RAID Setup works, after the upgrade?
greetings Lukas
I've got a Quanta Stratos server with an LSI HostRaid 2008 controller. I've got 24 SAS drives in it. No matter what I do I cannot get configure RAID 10 across all 24 drives. I've no experience with LSI controllers, I've only ever used PERC and I've always been able to generate volumes across all...
Hello,
I got a Seagate 2 TB Hybrid drive a couple of months back. But since a few days I get this message from Intel Rapid Store Technology, 'intel rapid storage technology your sata available disk removed'. But once I reboot or shutdown and start the system again the drive is shown again in...
Hi, after some searches, I got this idea to either get an Aorus raid ssd 2tb or build one to upgrade my hard drive speed to max. Currently my motherboard is a Ausus x99 deluxe ii which is gen03 and I can't get those gen04 high speed m2s. But I stuck with some questions and would be rly...
I was installing an ssd into my pc and it wasn’t being recognized in the bios so while being frustrated started messing with settings and stupidly changed the sata mode from AHCI to RAID when windows was installed on my hdd through AHCI. Now windows won’t start even in safe mode and the recovery...
I was wondering If all drives in a PC had to be in a raid configuration, or if you could have say your OS on an SSD and then have to HDD's in a RAID 1.
I have two hard drives in RAID 0 configuration and I'm getting an error screen when booting up my computer. After this screen and get the windows logo and the spinning circle on the bottom for a few minutes. After that my screen just goes black and nothing happens. I'm wondering if there's...
Hello to all.
I've a new X570-based system with 2*1TB NVME SSD configured in BIOS as an AMD-RAID (zero).
I successfully installed Windows on it providing the RAID drivers at setup time.
My plan would be install Linux (Mint) alongside Windows on the same system: using the Mint live USB i cannot...
I currently have a
860 EVO SSD 1TB M.2
860 EVO SSD 1TB 2.5 Inch Sata
860 EVO SSD 500GB 2.5 Inch Sata
is it possible to have all 3 of these as a Raid0?
I'm not getting reliable information as some people told me it won't work with M.2 and Internal SSD
but others tell me it will work.
How do I...
Hi!
I have a RAID 1 array with two disks running Debian (not an up to date OS version).
I provide at the bottom of the email the fdisk -l command output.
The disks are formatted with NTFS-3G, they have only data and not any primary partition for booting the OS.
What I want to do is:
stop the...
Hi guys,
I just recently built my first PC, however I had the longest time trying to get it to work.
So in the beginning when I first booted my PC, it would be stuck at the ASUS logo screen, with press del / F2 to enter BIOS screen.
- pressing the buttons did not let me enter BIOS and I was...
I've got a ROG Rampage VI Extreme Encore Motherboard with a DIMM.2 Card, and 2 M.2 SSDs from Samsung .
Im wondering if I could connect 2 M.2s to the DIMM.2 Card's slots and run those in RAID 0 as a bootable device?
I tried looking it up but people were saying that you would need VROC which I...
Weirdest thing. This just started happening after I moved places. Basically at this point I have a lot of random problems (unable to upgrade to 1909 being most prominent) but now I have this other unique problem. One day I randomly got the BSOD with error mentioned in title. I was looking for...
I have a RAID setup (with an onboard raid tool by intel on a Gigabyte mobo) on a locked buisness computer. All of bios is properly locked and cannot be played with except for the intel RAID menu which just appears seemingly regardless of what i do to bios security settings. Is there a way to...
Hello. Hoping someone can help me with this issue. I currently purchased a PC from ORIGIN. Everything was working fine until 10 days ago. My computer no longer booted to windows.. It just showed the loading circle at boot and then restarts pc.
I have a raid 1 setup with the raid controller. My...
okay, so a while back I heard Intel was using SSD drives, then "spanning" them within HDD, so you can get the speed of the SSD drive, but the storage of the HDD. Essentially, the SSD would serve as a huge cachet for the much larger and slower HDD.:geek:
How do I do this, though? do I need to...
We're looking to build a home server to be used for, steam web cache, file server (local and internet) and ripping and hosting Blu-ray's.
The hardware we're thinking about at the moment is:
CPU: athlon 3000g
Ram: 24gb ddr4 Storage: 10600gb 15k sas + 120gb ssd
Motherboard: Asus b450m micro...
Hello all,
Yesterday I was using my PC just fine. Today I wanted to boot it up again like normal but now it suddenly said there was no boot option available. Then I go into the bios and see that no M.2 card is being recognized. I go to the advanced tabs and do see under Intel Rapid Storage...
Hi, looking for more information on PCI lanes in accordance with a RAID controller.
Specs:
CPU: i5-6500
GPU: EVGA GTX 970
RAM: 8gb ram
MOBO: Asus H110M-C
PSU: Thermaltake 600w
HDD/SSD: Currently just one SSD installed.
My question here is what kind of RAID controllers will work with my...
Hi. I'm new to seeking help in forums so if I've made any mistakes please feel free to let me know (I'm not precious!).
I recently purchased an Adaptec ASR-8885 on Ebay. When I received it, I noticed that on the bottom of it there is a sticker with 'ASR-8885/DELL LF CARD' printed. OEM worries...
Im planning to buy samsung 860 evo for gaming storage,and im not sure if i should get 1 SSD of 2TB so i will not fill it up quicly
or 2 SSD of 1T and raid them so if one SSD dies i can still recover some data
Hi. I have been looking everywhere for a good DIY NAS build guide that is suitable for 4K video editing but I am not finding any good one. Can anyone point me to any good tutorial that might help?
I recently got a Lenovo L560 which i swapped the internal HDD to a cheap ADATA SU650 , the performance is okay but i wanna add another M.2 SSD in the WWAN port , i know by experience that it'll work but can i run both the 2.5" Sata SSD and M.2 SSD as RAID ? i don't know a thing about RAID setups...
I have 2x WD Black 1TB and put them into RAID 0 array, everything works except I can't see any improvement in performance.
I haven't run any bench test but I can tell you it was almost the same as what the single drive could do.
I done the RAID setup in BIOS and I'm not sure if I making...
Hello! I am having issues with setting up my SSD as a cache for my HDD.
Up until recently I was using a setup of 60GB SSD + 2TB HDD. The SSD held my OS. Now I bought a new SSD which is 250GB for the OS and planned on using the 60GB one as a cache for my HDD, however the issue I'm having is that...
Hello all,
So I've decided to build a low spec home NAS thingy, and so far, it seems everything works except for one of the most important things.
The RAID card.
Specs are:
Mobo: P8H61I-I
CPU: Currently some i3 of some sort but getting a 2700K from a friend soon
RAM: 4GB
The RAID card I got...
I want to build a PC with AMD Ryzen 9 3900x CPU and I would like to know if the Asus ROG STRIX X570-E Gaming motherboard together with the Asus Hyper M.2 x16 PCIe x4 v2 extension card allows me to configure 4 Samsung 970 EVO Plus M.2 NVMe SSD into a bootable RAID 10 array (Windows 10 Pro) and...
Motherboard: Gigabyte GA-H170N-WIFI
BIOS Version: F22e
RAID System: Intel RST
Drives: (4) Intel 540s Series 2.5" 1TB SSD
I was momentarily taken over by the big dumb and reset my BIOS settings while using a RAID 5 setup. This predictably wiped the RAID configuration on the disks and turned the...
First picture is me doing userbenchmark after setting up raid0. Second picture is a bench of when my 2 nvme sticks were not in raid.
I am using two 1TB nvme GEN4 sticks called CSSD-M2B1TPG3VNF 1TB, yes weird name, not known brand but they are mostly sold in japan only as far as I know, and they...
I just upgraded from my fx8350 to the Ryzen 3800x, so got a new mobo and ram and all that good stuff.
However, my windows 7 installation runs off two raided M.2 SSDs on a Marvell PCI-E RAID card.
In the past, I've just popped the card in and booted up, now this new board just doesn't see it as...
Is it possible to configure two NVMe SSDs installed into motherboard slots (not into DIMM extension board) as RAID 0 and two SATA HDDs as RAID 1 at the same time?
The idea is to have two SSDs as the main drive (1-2 Tb each) as RAID 0 to have them both full capacity and for speed.
Two mirrored...
I have 4 disks of 1TB in RAID 10 with 2 NTFS partitions, one of 500GB and one of 1,3TB.
After some time 2 disks of 4 are dead, and one has bad blocks but I can access it.
Because this is an old computer I left it without a backup for some time ;-(
With some programs like "ReclaiMe Free RAID...
Hi,
I have an IcyBox cheap 4 bay raid drive with 4x 1TB WD green drives. A couple of weeks ago they started un-mounting on my iMac (Sierra). Stupidly I didn't think anything of it really, so didn't do a recent backup. Then none would mount (I did a couple of partitions on the 3TB drive total) so...
Hi there,
I have a HP server with RAID1 (300GB2)and RAID5 (300GB3). Unfortunatly I have to rebuild the exisiting OS on RAID 1. I have full data on RAID 5. Can I access my RAID5 Data once I rebuild the new OS W2k12 on RAID1? Do i need to disconnect my RAID 5 disks while I'm building the OS? Any...
Hi i have found a server with some good specs (1600 watts, 12 cores 24mb cache 2.40ghz, 72gb 1033mhz,5tb of storage) and i have a rx 480 the server i am loooking at has a power cable for my gpu so that would not be a worry i know i can get windows 10 on it i just came here to ask if it is a good...
Hi guys,
I just added two WD Blue Drives (1TB each) with raid 0 using Intel RST which is seen as a single 2 TB drive in windows. Windows 10 is currently installed on a non-raid SSD.
For whatever reason, those two drives which are only used for offline data never turns off even when nothing is...
Hi folks.
I had to force the BIOS to start up after I initiated fastboot some time ago into UEFI utility. Long story. So I cleared the CMOS using the jumper for 5 seconds.
I rebooted and the normal EUFI utility came up and I changed my settings. However my OS won't load up after a reboot...
Hi. I currently have Windows 10 installed on a single Sata SSD plus Raid 1 HDDs for backups.
I am replacing my 2x1 Tb raid 0 SSDs with 2x2 Tb NVME.
I already understand that to install windows to the NVME drives in Raid 0, I have to configure them in the bios under raid mode and load the raid...