RX480

Installed a new hard drive on my son's computer it would no boot and is turning off and on in a loop. It's a dell8100 is the motherboard not good? I have no idea what to do. My Dad checked the new hard drive before he sent it so that's not the problem!! Is it toast?

I’m building my first PC and there’s an issue with the motherboard and IO shield. It seems like no one else has had this problem that I’ve seen on forums... my motherboard won’t reach the IO shield. It’s over where the standoffs are, and there’s no way I could adjust the standoffs to be...

I just upgraded from dual 7970 to Vega 64. I have no issue in all games except BF1, it stutters and freezes even when playing with a low number of players with a ping of 47. Settings are Vega 64@1682@1100mV HBM@1000@1100mV CPU 3.9Ghz 1300X. I tried 3DMark Time Spy to test GPU stability and it...

I'm actually looking around for a new monitor, and after doing some research, I have a couple of questions. 1) is there a "best" size for portrait mode? For instance, a point where it just becomes too long and strains your neck or other disadvantages? 2) is there a big difference between 16:9...

-- First of all, i don't know what category to put this in -- so my speedfan has started doing this random thing where it doesn't show the temps and doesn't give me any fan controls.. Please help http://

Hi I am using a ryzen 2600x, with Cooler master liquid lite 120mm. The config is 2 intake fans, and one radiator + exhaust on the back. My idle temperature stays around 48 degree Celsius. So I tried stress testing it with HeavyLoad software, after 5 minutes of constant 100% load temperature...

Ok so I bought RX 580 and Ryzen 2600X. I never updated the graphics driver since it was already installed when I built the pc. But I decided to update the graphics driver for more fps. And I did it and I got in trouble, I lost a lot of performance so I had to reset the pc and download a graphics...

I got my my local isp to install a fiber connection in my house. They installed it with a prolink prs1841 modem. Thing is it does not have a sc-cs connection - does that necessarily not make it fiber? I called them and they told me that it is a fiber box in the basement of the building and...

Can a third generation board like the Intel (DH61SA) support a 4th gen CPU ??

It keeps rebooting just after the logo acer explore beyond limits

Hello Everyone, I have a weird one for you here :P My HDDs disconnect, reconnect some times fail completely when I connect the new Razer Mamba (Wireless RGB with dock) via USB. Some times they work for a little while before failing I also hear some clicking/ticking from the drives when they're...

I'm getting very indecisive on a pc case for my new build. I have Maximus hero x 8700k Waiting for 2080ti Not sure what psu to get Ddr4 32mb 3000 ram I'm looking for a case that will cover the psu and its wires. Hdd and ssd on the back. $175 tops. Lower the price the better.

Hey guys, I just built a new pc and I've been trying to get a second monitor to work with it, but everything I've tried hasn't worked. My board doesn't have integrated graphics, so plugging it straight in didn't work. I got a DP to VGA adapter and connected it to my GPU and that still didn't...

Hello, people, i have a question about pc building, because i'm a newbie here. I have a GTX 1060 which requires only 6 pin connector to work. I am planning to upgrade to gtx 1070, because it's a great deal for me, but 1070 needs a 6 pin AND an 8 pin connector. But my power supply can handle only...

Hello guys, I just sold my 1080 GTX because I play CS:GO 99,99% of time and I really don't need that high performance card. I was wondering what would be a good option for CS:GO. I was thinking about 1050, but some people didn't recommend it at all... what are your suggestions? I play 1080p @...

Hello, I have a toshiba p75-a7200 laptop that has the old Intel centrino wireless-n 2230 card. Is there an upgrade ac dual band card that works with this computer. I have had repair people tell me to only replace it with one that is proven to work.

What is the meaning of 4K? 4K resolution explained. What Is 4K? A Basic Definition : Read more

Hi All, So I will hopefully be putting together my first custom water loop this weekend and I just realised that I need to clean the components before first use. What is the best way to do this? 1. Put the loop together. Fill it with distilled water (no additives, biocides, etc) and run it for...

Hi, I builded my pc 7 years ago and I think its time to buy something new :) My idea is to buy: -ASUS LGA 1151 PRIME Z270-A Intel ATX Motherboard -Intel Core i7 6700K Processor (4 GHz, 4 Core, 8 Threads, 8 MB cache, LGA1151 Socket Box) -Corsair CMK8GX4M2B3000C15 Vengeance LPX 8 GB (2 x 4 GB)...

So basically, in July, I tried to clean my screen with a glass cleaner like an idiot, and it completely started screwing up, making patterns and only working as it used to if I hit it. I'm most likely screwed due to replacement screens and their parts costing $175-$400. Here's a video showing...

I am trying to connect my Play Station 4 slim to the sony receiver (STR-DH500) to watch movies in a projector. The video is good but the audio is not working. Any solutions to this problem? (PS4 has no optical cable output)

I had weird power losses to my system in the last few days(today alone twice) so I started looking for indicators as to what could be causing it. Looking at hwinfo shows something weird, but I'm not sure it means anything. I'd appreciate if anyone with insight gave their 2 cents as to what it...

The power supply for my OEM RAM provides 1.5v, whereas the new RAM that I bought only needs 1.35v. Would the new RAM get too warm when supplied with 1.5v? TimDaniels

What i currently have is 2500k in p8z68-v pro with 32gb ram, 860 pro and gtx 670. This setup is still good enough for me, but it lacks decent usb 3, only has two 6gbps sata, no m.2 etc. if i start upgrading i basically need to change everything, but there is no point to do that if i can't at...

Hello, I have a old pc with intel e8400 cpu, Abit ip35 motherboard and 8gb DDR2/800 ram as a second pc at home for basic use. I would like to upgrade a little with a minimum cost. If I change cpu to Intel Xeon L5430 (from ebay, 18 euro, modified to work with LGA775 mb), will I see noticeable...

My USB mouse light up but doesn't move it's connected but cursor and buttons doesn't work. Need help

Psu : GX-2 750w 80plus Gpu : ASUS ROG Strix A8G Gaming GTX 1080 8GB GDDR5X Cpu : Intel i7 8700k MOBO : MSI Z370 Gaming Plus LGA 1151 (Soket H4) ATX 64GB DDR4 Ram : Corsair Vengeance LPX 16GB (2x8GB) DDR4 3200Mhz CL16 RAM SSD : Transcend 128GB SATA 3.0 HDD : WD 2TB Caviar Green Case : Xigmatek...

Hi all, I have the Phanteks - Enthoo Pro M Tempered Glass (Black) ATX Mid Tower Case. I went to plug in the front panel connectors, but I can only find the Power SW and the HDD LED. Many youtube videos show other connectors like the Power LED or Speaker. Does my case not have these, or am I just...

Hello I have recently purchased a Netgear modem and Netgear Nighthawk router but I keep coming across the problem that my network will assign the devices a 10.11.x.x IP on the network and then those respective devices do not work online since it's not a 192.168.x.x address. I know for netgear...

I have seen stuff about how the H7 won't fit with AM4 Sockets. On the actual H7 Description on Pc PartPicker, it says it can be used on an AM4 Socket, but then at the bottom of the page below the final price, it says I might need an adapter for the H7. Is the H7 for sure compatible with the...

Hey guys! So I have a potential problem with my GTX 1070 from Zotac I previously had a 1060-6GB running in my setup which is as follows: i7-4770k 12GB DRR3 Dual channel XMP SSD So my problem is, in my most played game, i now get less performance with the 1070 than I did with the 1060. I was...

Hello All, I have recently realized that my all of my games crash and I believe the reason is due to a leak. For example BF4 I have on medium graphic settings and the GPU goes up to 99% and the memory to 40-50%. BF4 then crashes with no crash crash notification just cant do anything even...

Friend is getting the "please power down and connect the pcie cables to the graphics card" error when installing a used PNY GTX 960. She currently has 600W and only 1 6pin connector. Old card still works when she puts it back in. This is what she currently has for specs, however she has...

Hi,I'm trying to update my 32 bit windows 10 to a 64 bit,so I try to the disk from the BIOS but my keyboard is not working, and whenever I try to use the external keyboard the the BIOS won't load,it will only show a blank screen unless i restart it without the external,so i try to load the BIOS...

I am using the following line to preview my webcam: ffmpeg -s 1280x720 -framerate 30 -pix_fmt yuv420p -rtbufsize 100MB -f dshow -i video="Logitech Cam#1" -c:v copy -an -f sdl "WebCAM Preview" this line works fine with cam #1, however when try it with cam #2, I get the error: [dshow @...

(Pasted from reddit) For the past day I have been experiencing disconnects from my computer. I was playing fortnite so I thought that was causing my issues but then started playing other games and was still getting the same problem. Randomly everything plugged into my computers usbs disconnect...

I have a Dell Latitude e7470 which I would like to RAM-upgrade to 16GB. The issue is it is a Company owned machine with an encrypted disk and a security-crippled operating system. I just want to swap the RAM for more compatible RAM, but am trying to figure out whether this may create any bad...

Need help I have a Toshiba S55t-B5273NR and it keeps reading no bootable device restart system what can I do

My Lenovo Yoga 720 does pop up the logo and the time stamp with the fancy background but once I press it there's nothing else but the background. [don't post your email address on the forum] for more info

I recently purchased some AF120 fans for my PC, I plugged them into a phanteks PWM fan hub, and they arent turning on. The fan hub is turning on (it has LED lights, and those are on). I have the power connected to the motherboard SYSFAN header, as well as via the sata connection. neither are...