Hello, I recently upgraded from a 3700X processor to a 5950X and an Arctic 360 mm liquid cooler.
Motherboard: ASUS X570-E STRIX gaming.
RAM: 2x16 GB 3600 MHz Corsair Vengeance DDR4.
When I first installed the system, the temperatures could reach 90 degrees. I also undervolted from the BIOS. (I...
I’m facing a strange issue with my PC. I have a Ryzen 3600 paired with an MSI B450 Tomahawk motherboard. It was working perfectly fine until I swapped out my GPU to test a new one. The new GPU worked without any problems, but after switching back to my original GPU, my system started...
Hi All 👋🏻,
I have an Asus Dual RTX 3060 OC V2. The card was hitting 90°C at 100% power due to bad thermal paste. I was throttling the card to run at 90% power and hitting 81°C for 5 months. (Score 4880). (160W) Performance sucked.
Then now I took a huge risk and repasted the card with Arctic...
As title says I'm trying to get temps a little lower. I've never under/overclocked in my life. When I built my PC they were out of 14700k so i went with the Intel i9-14900k.
I'm using an air cooler which i know swapping to AIO would potentially help a bit but ideally I'd like to avoid messing...
Hello,
Currently I'm slowly upgrading pc parts as they fail and/or I can afford it, and as a result right now I have the kind of weird combination of an Intel i7 7700k CPU with a 4080 super as my GPU. I am experiencing lag spikes in games after this upgrade and after investigation I believe it...
Hey All - this is a unique one. I have had an RTX 2060 for a few years. The first thing I noticed with the card was that RTX features would crash instantly. I brushed this aside as RTX wasn't too important to me at the time.
It has a unique issue I noticed when games started being DX12 or...
ok, as in subject, my gpu is a 2060 asus rtx 6gb card, i have had it since 2020, and it has been a not bad update from the 1060 6gb card i had, but the rtx and newer model, it is a step up i have felt, but, i run, 16gb of corsair memory, with a older cpu a 2600 Ryzen 5 3.4ghz 6core 12 thread...
Hi,
I bought a second hand ASUS STRIX 2080ti for a bargain for my first build but things haven't worked out so well.
When I installed the graphics card into my system everything seemed fine but when I try to run any game or benchmark it crashed immediately. I installed a fresh version of...
GPU: ROG STRIX GTX1080TI 11G GAMING
Cpu: Intel i7-8700k
Ram: 32GB g.skill 3200mhz
Motherboard: Asus ROG Maximus XHero
PSU: EVGA Supernova G2 850W
Monitor: LG Ultragear 34GK950F-B 34 inch 21:9
BIOS: 2701
OS: Windows 11
My computer work fine, except when I play games, any games. It crashes...
I know this is a common question, but Amazon won't let me return the product (despite being a Prime member) and I'm desperate for some solution.
I bought (Amazon.in: Buy G.Skill Ripjaws V 16GB (2x8GB) DDR4-3200MHz ) I know for a fact that my motherboard supports DDR4 3200...
Hi, here's my gaming laptop specs:
ASUS ROG SCAR II GL504GW
CPU: i7-8750H
GPU: RTX 2070
RAM: 16GB DDR4 2666 MHz
I have also previously undervolted my CPU to a stable level using Throttlestop and have MSI Afterburner installed but I didn't bother tweaking any of the values there since I purely...
While building a system from used parts, I installed a GTX 650 Ti BOOST, and the only way I could get games to run on it is if I underclocked the GPU. CPU is AMD Athlon II X2 250. When I start a game without underclocking the GPU, the game will crash without fail. If I overclock the GPU even...
Hey guys,
I have a RTX 2060 - I have used Afterburner to underclock the core and increase the memory clock. However the power usage has remained the same.
Is that normal?
Underclocking the memory usually gives me some time before artifacts and crash, but its absurd to expect to have to do such just to not have your time ruined. Even with the memory underclocked, I still end up with crashes later. Just more game time at best. I'm on my 5th 1080ti via RMA. My PSU...
I wanna undervolt my GPU but the only thing that is hindering me from doing it is because of the different looking fan curve editor in my MSI Afterburner software.
My Voltage Curve editor looks like this: https://ibb.co/4VStQvN
While the numerous videos I have watched from Youtube concerning...
In MSI Afterburner there are two settings regarding power, there's the "Power Limit" setting and the "Power Voltage" setting. So what setting manages the undervolting? I wanna try undervolting my GPU, I have been studying and reading about it on the internet and on numerous forums, and from what...
Heyo
I've decided to build a small crypto rig, I'm just getting started with this and I don't plan on becoming rich or getting a huge rig mainly because I can't really use cryptos for anything where I live and I don't know how to transform them into real money.
My rig consists of 2 MSI RX 590...
hola a todos, me presento me llamo ismael, es mi primer post.
mi problema es que quiero hacerle underclock a un RYZEN 3200g on ASUS PRIME B450m-a, pero solo me permite bajar hasta 2.3ghz,
hay alguna forma de modificar el bios y sacarle el limite inferior?
me imagino que no hay un problema...
I have a new fx 8320 that is underclocked due to being in a 95w mother board when the cpu is 125w, will this underperform a fx 4300 which i previously had?
My ryzen 5 3500 is set at 4,1GHz and i would want to set it down to 3,6GHz and i also read that decreasing the voltage makes the cpu run cooler. Is there any specific voltage I should but it on because sometimes the voltage spikes to 1,4 volts while using 4,1 GHz and isnt that a little much and...
I have a Ryzen 5 3600, B550 Aorus Pro AC.
I am trying to squeeze the most performance out of my system, just OC'd my 2070 Super a little, +250mhz memory, +15mhz core clock. (I'm scared, never even had a pc before lol)
I read somewhere that the ultimate criteria for RAM speed is the absolute...
Hello, I have Gigabyte GTX 980Ti G1
After playing with msi afterburner (stock BIOS). I had stable OC
With:
+87mV
+130% power limit
+110 Mhz core
+400 Mhz memory
Then I tried with +450 Mhz memory and the PC froze. I rebooted, reverted to the last stable OC profile, but since then the GPU...
Hi there folks,
Today my worst fear has happened, full screen vertical lines (artifacting) and both screens turning off. And I need help diagnosting this issue.
I have an ASUS R9 280 DirectCU II TOP 3GB and sadly when I search the internet, this gpu series (R9 280, 280x, 290) seems the culprit...
I've been having problems since day 1 of building my PC. It started with the monitor being 'out of range' unless I used another monitor to setup the PC (even though both monitors are the same resolution). Eventually I managed to install windows, ran fine for about an hour until it started...
A friend of mine is upgrading this system and is willing to sell me his i7-8700 for cheap. I think I can just drop it into my current system (see below), correct?
i3-8100
G.Skill DDR4 2400 (15-15-15-35)
Gigabyte B360H (Intel B360)
I know the MB supports the i7, I assume there must be some...
Hello guys, first my specs:
MOTHERBOARD: Asus M5A99X EVO R2.0
GPU: radeon rx 580
CPU: Fx 8350 (I have it underclocked at 3.5 instead of 4ghz to reduce heat); has stock fans
CASE: idk the name, its sentey that has 1 big fan at the front and 1 at the side (the one in the front takes air in and...
Hello everyone,
Recently I found out that my AMD FX-8350 wasn't working at usual 4.0GHz, but rather at 3.4GHz. I have it for a year now and it started doing this just a week ago.
I was never messing with the processor's speed, never overclocked it, nor underclocked it, I don't even know how it's...
So I recently built this pc, everything seems to be great with it, other then one day it just decided to shut off randomly (no OC) well I ignored it, then it started happening more frequently. Now it's to the point the PC will not go passed BIOS unless I underclock like crazy (3.2GHZ) with the...
I have recently purchased a 5700xt, and have tried very light crypto mining with it - but it lags out my whole computer, so I can't even move the cursor without visible lag. I believe this to be the Core Clock and Memory Clock being TOO HIGH out of the box, so I am considering slightly...
Hello...
So for my own reasons, I need a video card that performs so bad that it cannot run games, but is good enough for basic use like web browsing, video playback, and other basic applications like Microsoft Office.
I did research on this, and found out that I can use nibitor to edit...
hey guys , wondering if you could help me out. . . just got my new aorus 2070 super and the memory clock speed in game is actually lower then my old 1070. my factory oc 1070 would have an in game average of 2000.2 mhz and my 2070 super is getting 1750mhz. is this maybe becuse the new one is...
Ok, so, I have my RX 570 which I mostly run in complete underclocked state for two reasons. First, it keeps the PC silent, about 40C when idle. Second reason is that I don't play many games that require extreme power (so to say), usually Rocket League or Forza Horizon 4, which are not hardware...
http://prntscr.com/pl7qqq this screenshot shows basically it all, the processor info and everything. I did overclocking with MSI Afterburner earlier today because I thought that will help fix FPS drops every few seconds while I play games, but I found out that it is because of the too hot CPU (I...
Hey all!
I am currently working on an essay which will look at whether it is more important to increase CPU power, or if it saves more time to improve the efficiency of the algorithm itself. In testing this I will need to underclock my cpu and disable some cores in order to test how fast it...
Hello all,
I am trying to underclock my 2 Gigabyte RTX 2080 Ti Gaming OCs in NVLINK SLI because I want my PC to draw less wattage from the wall to lower my electric bill every month. Currently at default settings, I am drawing about 750-850 watts playing Battlefield V at 4k 144hz max settings...
I'm want to buy this build (for machine learning): https://pcpartpicker.com/user/SurrealEverything/saved/#view=x6NHBm
I will only buy one gpu at first, but I plan on buying a second one later.
What i cannot figure out is:
Would 2 2080 ti gpus physically fit on a triple pci slot motherboard...