Hi everyone,
I'm dealing with a very specific issue with my setup for months now, more specifically with my USB peripherals .
The setup: 1 mic, 1 keyboard and 1 mouse all connected to a powered USB hub that is connected to my PC.
The main issue: The devices seem to be freezing for seconds the...
I've done some prior research and can't find a definitive answer. I have a laptop hooked up to a USB-C hub outputting to a 1080p 60hz monitor. I'd like to purchase a second monitor which would ideally be 1440p 144hz. From what I've seen, this isn't possible as most hubs are locked to 60hz. Some...
So I just bought a new laptop HUB/Dock for school. I've hooked everything up, keyboard, mouse and DP Monitor. However the monitor doesn't detect the hub nor does the computer detect that there is a monitor plugged in. The mouse and keyboard work just fine though. Is this a case of my laptop...
I have a Delock USB Type-C Hub [ DeLock USB 3.1 Hub 3 Type-C ] that supports up to three USB-A Ports and a SDcard [ it also has a 5V power-in barrel connector ]. When I use it on it's own with it's own attached 10cm cable it works like a charm. When I plug-in the USB-C extended cable 1m ( male...
My laptop is the Lenovo Ideapad S340-14API with a Ryzen 7 3700U. I got this laptop back in 2020 and required a wired internet connection for better stability, so I got this no-brand Type-C Hub that has an RJ45 port and 3 extra USB ports, which worked perfectly fine for over 2 years until now...
I have a laptop and a portable monitor I'm trying to connect together using a USB-C hub so I quickly just plug in only one cord into my laptop so I can get to work. Ideally, any non-tech savvy colleague can pick it up, plug one thing in, and just start working. I think my solutions are...
Hi,
I have a Dell Inspiron 5567 running on Windows 10 Home (21H2 19044.1645). It has two USB 3.0 ports on the motherboard and one USB 2.0 port attached to the motherboard using a flat ribbon cable. Last week on Monday I powered a small DC motor using a spare USB cable and one of the USB 3.0...
Hello there,
I have started getting some USB disconnect and reconnect sounds out of nowhere and I don't seem to be able to find the source. I have downloaded USBLogView and it shows me well this
The amount of times this is happening to me seems random and it tends to happen more often whenever...
I'm looking for a USB hub to connect to a Raspberry Pi Zero that will pull very little power on its own. I've tested about 5 USB hubs and observed that each hub pulls about 50 mA on top of the power used by the devices plugged into it. I'm looking for a hub that will pull less than 10 mA. Does...
My setup:
Powered USB hub
Wall outlet power adapter plugged into the hub
USB devices plugged into the hub
Hub USB cord plugged into my computer
Since my USB hub is getting auxiliary power, could I cut the hot wire on the USB cord leading to my computer so that I'm only using the data lines for...
Hey!
I bought a generic usb hub because my front ports are broken and the back ports are hard to access. Whenever I boot my pc I have to unplug and plug the hub again every time for it to be detected by windows.
Device manager says "Unknown USB Device (Device Descriptor Request Failed)" and in...
Hey everyone,
I have tons or peripherals ( with some requiring 2 ports due to passthrough, e.g. keyboard, mousepad, the ROG Throne...). Port shortage is not an issue since I always have higher-end mobos in my builds and pay attention that there are enough USB ports. The amount of cabling is...
Pretty simple just for a good USB 3.0 hub that:
Connects to the computer via a 2-4ft Type-C connection
at least 4 Type-A ports
Every hub I seem to find either has less than 4 Type-A hubs, has a cable that’s less than 1ft, or over $100, so either I’m blind or not looking in the right places.
There seems to be many "solutions" to this but they, unfortunately, dont work for me.
I have a Anker 7 in 1 usb c hub plugged into a laptop. I have a keyboard connected to it (USB 2.0 keyboard with USB 3.0 port) and everytime I start the computer I get the "unknown device descriptor request...
Hey, I have a certain problem right now, and I am not sure what to do with it.
I have a desktop quite far from my table, so I use a 3.0 USB hub (powered -> i-tec USB 3.0 charging hub 7port) and in it, I have connected Roccat Kone aimo mouse, HyperX keyboard, USB Mic, and Receiver for my steel...
Hi team! :)
First off, this is my very first time posting on here and I'm very excited.
So Im currently building my setup but I have a little problem with USB components, I have these:
NZXT Grid v2 (internal USB header)
NZXT Hue 2+ (internal USB header)
Asus ROG ryuo AIO (internal USB...
Hello,
I have experienced usb power surge on my non-external(outlet powered) USB Hub, now I am considering new options which should be this Outlet powered external USB Hub, but i am not going to use it for charging, i mainly want to handle it wifi and BL conector, Web camera and USB...
Hello,
I am posting for the first time on this forum. Before stating the problem, I'll explain my work-from-home setup. I frequently switch between personal (Dell XPS 15 9570) & work laptop (Dell Latitude 7390) so I recently bought a USB Type C hub to make this switching easy. I've hooked my...
I have this issue since this laptop comes. so the problem is that my usb devices that I connected to my usb hub is sometimes loosing power, I have my mouse, keyboard, and soundcard to my usb hub.
I've asked this question before and someone has answered my question which is he suggest me to...
I have 2 1080p monitors, one with a 144hz and the other with a 75hz refresh rate. Given that 4K 30Hz uses the same bandwidth as 1080p 120Hz, I bought a USB Hub which is adviersed as capable of doing single 4K 60Hz or dual 4K 30Hz HDMI outputs.
However, when I connect them up, I am no longer...
Hi, I am trying to find a dc-powered USB 3.0 hub with a built-in adapter to ethernet. I am trying to run a bunch of USB peripherals to a pc about 50ft away, and I thought this could be a viable option. If anybody has any product suggestions I would love to hear it.
Hi all,
I recently bought a lot of accessories for my laptop was planing to put it in a dock and connect it to monitor, keyboard and mousse.
However, i only have 3 USB 3 type A ports and one of them is broken and i need to connect 4 USB devices (rgb keyboard, rgb mouse, rgb headphones, and rgb...
I recently bought a usb hub with dc power in for my laptop. Everything works just fine when i connect the usb hub, but then i insert the dc adapter for it, my laptop just crash and shut down. When i turn back on, it shows black screen but the led shows laptop is on, usb is working and the fan...
I have a 2 tb toshiba canvio hard drive that I bought a couple of months ago that was working fine. I recently lent it to a friend of mine because he was having issues with his macbook and apple support said he needed some extra space to do whatever it was he needed to do. Well when I got back...
Can I connect a Thunderbolt 3 HUB to a MacBook 12" (non-Thunderbolt 3) USB-C port and still have all HUB ports usable (ignoring drop in transfer speed)?
HUB in question: OWC Thunderbolt 3 Dock
https://www.owcdigital.com/products/thunderbolt-3-dock-14-port
I know OWC sells USB-C HUB model, but...
Hi All,
After waiting for the nvidia reveal yesterday I am somewhat heartbroken to discover that the RTX 2080 ti is currently just a little more expensive than anything I can realistically afford atm. Being in a situation where I really HAVE to purchase a new card soon (and as someone for whom...
Hello everyone,
Just received my 8700k and planning on building my setup. This is my first build and was hoping to get some answers on a couple inquiries. Your help is much appreciated. I searched the forum for some insight and wanted to get your thoughts.
I'm thinking of deliding the 8700k -...
Firstly, thank you for taking the time to read this. Hopefully I'm posting this in the correct section and if not, perhaps a mod can move it, but I'll get to the point. I'm currently looking to build a new system capable of recording gameplay at 1080p/60fps. I'm not looking to stream, but...
Recently I replaced my motherboard, cpu and RAM. The new components are:
Motherboard:
ASUS Prime Z270-A
RAM:
Corsair Vengeance 16GB DDR4 3200 Mhz
CPU:
Intel i7-7700k
I am using the same hard drive, psu, and gpu as before the upgrades. Note that I did not fresh install windows. I believe...
I am unsure whether these parts are compatible or if they are any good as I am quite new to this, but I've put together this list with a little bit of research. I was thinking of a blue LED colour scheme but that doesn't really matter all that much.
https://uk.pcpartpicker.com/list/YbdB8K
If...
Hello,
All of the games that I play have been experiencing very low frame rates, when normally they run at 50-60fps. So, I thought I needed to restart my computer and when I did, I got a high CPU temp warning. I downloaded a CPU temp reader and at idle my CPU is at 80c. I applied new thermal...
Hi!
So I decided to put together my old pc again to use as my backup. But once I pushed the power button nothing happened, nothing at all. So my first thought was that I had plugged the power switch incorrectly into the motherboard, so I checked and that wasn't it. Then I checked if any of the...
Is it normal to have "Android OS" as highest battery usage ?
Lets be clear here, I'm aware that I have low budget 7" tablet with weak battery but I'm just making sure is this normal anyways.
This happened after 10 hours of sleep, 100 minutes of not touching tablet neither and then 20 minutes...
My computer had a power surge due to a thunderstorm recently. It damaged my network card, but after a few hours later my whole computer shut down and wouldn't turn back on. I reset the CMOS battery in my motherboard but all it did was start up the fans before shutting down again. I used the...