Hi folks,
I have an asus hd6850 and just added a msi cyclone 6850 to an asus X58 sabertooth.
I have crossfire enabled in CCC.
When i look all i see is fan speed in CCC for the 2nd display.
GPU-z shows my asus card as crossfire enabled 2 gpus but the msi shows disabled.
Device manager shows both enabled.
I have uninstalled all ati/amd sw from my machine, removed the registry entries for them, and manually removed all folders pertaining to amd/ati before reinstalling the sw and the drivers.
If I swap the cards it does the same but with the asus card showing disabled.
GPU-z does show stats on the msi board even though it shows disabled.
I know i am in the correct ports.
I am running a 1000w power supply so power is not an issue.
I have tried 2 diff crossfire bridges.
I found another thread that was slightly similar and a comment to look at an old thread over at AMD but the thread is no longer there.
my pc.
i7 950 stock speed
asus x58 sabertooth mobo
12 gb ddr3
1 asus EAH HD6850 with stock overclock
1 msi cyclone r6850 with stock overclock
is it possible that since the stock oc is different for them that is the problem.
I am getting slightly annoyed with this, esp with it being my first attempt into crossfire ....
I have an asus hd6850 and just added a msi cyclone 6850 to an asus X58 sabertooth.
I have crossfire enabled in CCC.
When i look all i see is fan speed in CCC for the 2nd display.
GPU-z shows my asus card as crossfire enabled 2 gpus but the msi shows disabled.
Device manager shows both enabled.
I have uninstalled all ati/amd sw from my machine, removed the registry entries for them, and manually removed all folders pertaining to amd/ati before reinstalling the sw and the drivers.
If I swap the cards it does the same but with the asus card showing disabled.
GPU-z does show stats on the msi board even though it shows disabled.
I know i am in the correct ports.
I am running a 1000w power supply so power is not an issue.
I have tried 2 diff crossfire bridges.
I found another thread that was slightly similar and a comment to look at an old thread over at AMD but the thread is no longer there.
my pc.
i7 950 stock speed
asus x58 sabertooth mobo
12 gb ddr3
1 asus EAH HD6850 with stock overclock
1 msi cyclone r6850 with stock overclock
is it possible that since the stock oc is different for them that is the problem.
I am getting slightly annoyed with this, esp with it being my first attempt into crossfire ....
Facebook
Twitter
Instagram