Dear all
When I took off the bottom cover of my laptop, to remove some hardware - I was nervous if I bent or harmed hardware in the proces.
How would you make sure, that:
The system creates and writes data to the drive, the same way as before I removed the bottom cover.
Data is created in the CPU and written to the drive correct and not corrupted or wrong.
In regard of my other thread:
forums.tomshardware.com
Thank you
When I took off the bottom cover of my laptop, to remove some hardware - I was nervous if I bent or harmed hardware in the proces.
How would you make sure, that:
The system creates and writes data to the drive, the same way as before I removed the bottom cover.
Data is created in the CPU and written to the drive correct and not corrupted or wrong.
In regard of my other thread:
Question - Concerned if damaged hardware parts when removing bottom cover on laptop
Dear all When I was separating the bottom cover on my laptop with a plastic plectrum. Without any problems I separated / loosened the bottom cover on the left side and right side, and most of the front side. It wouldn’t let go at the front, in front of the mousepad – I was missing to unscrew...

Thank you