Hello everyone, i was wondering how did i end up killing my cpu by installing a new ssd?
At first my pc is working perfectly fine. I bought a new ssd and try installing a new windows os on it, but my pc won't boot with the ssd installed. When i tried to boot my pc without the ssd, my pc turns on but it is stuck in a boot loop with no signal displaying on my monitor. Even the keyboard and mouse won't light up but the rgb fans do.
What i've tried so far:
Pc specs:
At first my pc is working perfectly fine. I bought a new ssd and try installing a new windows os on it, but my pc won't boot with the ssd installed. When i tried to boot my pc without the ssd, my pc turns on but it is stuck in a boot loop with no signal displaying on my monitor. Even the keyboard and mouse won't light up but the rgb fans do.
What i've tried so far:
- breadboarding the system with the cpu and ram only.
- swapping ram's slot, trying only one at a time.
- swapping a different psu.
- booting with and without the gpu.
- cleaning the rams with an eraser, and the slots as well.
- reseating the cpu ( as a last resort, even though i've no idea how this is related to my issues ).
- tried booting without any ram installed, there's a beep from the motherboard speaker.
- tried the cpu on my friend's pc ( he got i5-3470 ) and my i7-3770 doesn't work. PC boots up but with no display.
Pc specs:
- cpu - i7-3770
- motherboard - foxconn h61mxe-k
- ram - 16gb (2x8gb) ddr3 1600mhz (kingston)
- hdd - 1tb western digital green
- gpu - rx 570 overclocked ( 1400mhz at 1110mv )
- psu - superflower 600w
- case - deepcool maccube 110
- monitor - acer r231