Different voltage memory modules

[verst]

Hi,

Question regarding upgrading my RAM.
Originally I built my system with 2x2GB 1600MHz CAS 8-8-8-24 1.35V DDR3 GSkill modules. Like these, just CL8:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231319

Recently I purchased another set of GSkill memory, this time 2x4GB 1600MHz CAS 8-8-8-24 1.5V DDR3. This one:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231445

My question: is it OK to mix these two on my motherboard or am I better of just using the newer set?

Thx for any help!

 

[nikorr]

It should work fine, although sometimes it doesn't, but mostly it does.

Its not recommended by the mobo makers, but mobos are flexible.

 

[jsc]

Link to first memory says CAS9 at 1.35 volts. That means that at 1.50 volts, there is a really good chance that at 1.50 volts, they will run at CAS8.

Running both sets at 1.50 volts and CAS8 should work.

 

[verst]

So there is no chance that I'll end up frying anything (mobo, RAM, processor)?

OK, I'll give it a shot

 

[nikorr]

Not with that, just watch out for the static electricity build up in your hands!

Touch the case metal frame before u touch the RAM.