Question DRIVER IRQL NOT LESS OR EQUAL

[ItzLonix]

Hello guys, built my PC 3 days ago. Yesterday installed windows, apps, etc. started playing games and firstly I got blue screen with “page fault in nonpaged area”. Then after reboot, i tried to play one more time, and after like 20 mins got “driver IRQL NOT LESS OR EQUAL”.

PC SPECS:
Mobo - Msi z390 MAG mortar
CPU - I7 8700K OC to 5ghz (Vcore 1.380)
RAM - Gskill aegis 3000mhz 2x8 gb (running XMP 3000mhz)
GPU - MSi armor 1080

GPU drivers, lan driver, mobo bios updated before all those playing
Any thoughts?

 

[Gmoney06ss]

Possible unstable oc or too low ram voltage. Try turning off xmp and the oc. See of it plays ok at factory settings. I had a similar issue, turned out to be an oc issue.

 

[ItzLonix]

Possible unstable oc or too low ram voltage. Try turning off xmp and the oc. See of it plays ok at factory settings. I had a similar issue, turned out to be an oc issue.

But my ram must be able to run at 3000 as I bought 3000mhz version

 

[Calvin7]

Model F4-3000C16S-8GISB

Some people buy Single modules and double up on them. Since you don't list a part number, I don't know exactly what you have.

 

[ItzLonix]

It is F4-3000C16S-16GISB, bought 2 sticks by 8gb so I have 16. Now everything is ok with XMP off. But I bought 3000mhz version for 3000 mhz lol, not for 2133😂

Model F4-3000C16S-8GISB

Some people buy Single modules and double up on them. Since you don't list a part number, I don't know exactly what you have.

 

[Gmoney06ss]

It will more than likely run at the rated speed, but you'll probably have to adjust some voltages manually.

 

[ItzLonix]

It will more than likely run at the rated speed, but you'll probably have to adjust some voltages manually.

It run at 1.35 3000mhz? What voltage should I put to get it stable

 

[Gmoney06ss]

You'll have to try different voltages. Try 1.36, just keep it under 1.4v.

It may also help to read the memory/xmp troubleshooting thread at the top of the page.