Hi Guys,
I have a Ryzen 5 3600 with an Asus Prime B450 Plus board. I have a Samsung Evo SSD and a 1 TB HDD that are connected to my system. I bought an NVME drive today and followed the process below to install it:
Once into Windows I noticed that neither the SSD nor the HDD were being detected. At this point I noticed that they were in sata port 5 and 6 and read that if an NVME drive is installed in this board that it uses sata 5 and 6, so I unplugged them from 5 and 6 and installed them in 1 and 2.
Well now I am getting nothing from my PC. The motherboard turns on, all the lights turn on and the fans spin, but I get no display. I have tried everything below and still am getting no display:
I’m at a loss. It’s like my motherboard is bricked, but I don’t know what could have caused it.
I have a Ryzen 5 3600 with an Asus Prime B450 Plus board. I have a Samsung Evo SSD and a 1 TB HDD that are connected to my system. I bought an NVME drive today and followed the process below to install it:
- Installed NVME drive
- Installed Windows onto drive
- Booted onto new Windows on NVME drive
Once into Windows I noticed that neither the SSD nor the HDD were being detected. At this point I noticed that they were in sata port 5 and 6 and read that if an NVME drive is installed in this board that it uses sata 5 and 6, so I unplugged them from 5 and 6 and installed them in 1 and 2.
Well now I am getting nothing from my PC. The motherboard turns on, all the lights turn on and the fans spin, but I get no display. I have tried everything below and still am getting no display:
- Re seated ram
- Reset cmos
- Removed NVME drive
- Installed SSD and HDD into sata 5 and 6
- Checked all cables, nothing is loose
I’m at a loss. It’s like my motherboard is bricked, but I don’t know what could have caused it.