Intel Overclocking Club

Page 20 - Seeking answers? Join the Tom's Hardware community: where nearly two million members share solutions and discuss the latest tech.

rizzla_93

Distinguished
Jul 22, 2010
5
0
18,510
@4Ryan6 Agreed! :) Do you guys still add stable / unstable OC's to the lists? Couldn't find any socket 2011 CPU's on the list, that's kinda why I posted my info.
 

rizzla_93

Distinguished
Jul 22, 2010
5
0
18,510
Name: Jay
CPU: i7-4930K
Motherboard: ASUS Rampage IV Formula
CPU Voltage: 1.29v
CPU Bus Speed/Multiplier: 100*46
Clock Speed: 4.6 GHz
RAM: Corsair Dominator Platinum 1866 MHz 9-10-9-27-2T
Cooling: Corsair H100i
OS: Windows 7 Ultimate 64-bit
CPU-Z Validation: http://valid.canardpc.com/n25b17

9d5dd918_YEP.jpeg


I could probably go higher, but I like the speed/volts/temps like this :)
 

Leung Kenneth

Honorable
Feb 2, 2014
3
0
10,510
Name: Kenneth Leung
CPU: i7-2600K
Motherboard: Gigabyte Z77X-UD3H
CPU Voltage: 1.32V
CPU Bus Speed/Multiplier: 37 * 100.08 MHz
Clock Speed: 3.7ghz
RAM: 16384 MB DDR3 Dual Channel
Cooling: Watercooling Loop
OS:Windows 7 Home Premium 64 Bit
CPU-Z Validation:http://valid.canardpc.com/kfukt7
 

jnewegger23

Distinguished
Is this club still alive? I pm'd amuffin back Jan 13, 2014 (2 days after my initial post). Since then it's been nearly 3 weeks and no answer.
I went to UCLA my dad disappeared in the middle of my first quarter, I had to work 3 jobs with no car so I of all people get the plight of having to work and go to a very difficult college.
If I were to be in a position of authority during that time, I still wouldn't ignore responsibility to this extent. You need to always hold yourself accountable and at least take the time to communicate what you can or cannot take care of so that others as a consequence can create solutions to fill in for you.
This is not a personal attack on amuffin but yes I am calling him out. I actually made my first attempt to join this club nearly a year ago and said nothing and observed the same behavior but have given him the benefit of the doubt.
I'm not asking to take over this as I am not a moderator by any means. But perhaps there is someone else who can handle this level of commitment better where it's within reason. This is unreasonably neglectful to be tolerated much further. I may sound upset but I'm not. I'd just like to keep others who are building their enthusiasm for this community to be rewarded with more fairness.
So amuffin, if you care about this little club at all still, could you take a moment to address the neglect. Whatever you're going through I'm sure it's hard whether it's the loss of a loved one, difficulties in a relationship, school, work, family or all of the above at the same time, I get it. I am the last person to be insensitive to that but there is a level of respect you must always maintain and that is your integrity. Please display some of it soon!

Your last public contribution for this club was October 18, 2013. It's a new year, let's get back on the horse and ride it with a much better standard! Thank you!

With all due respect,

Justin S.
 


Pretty nice chip you got there if you are using the H80i with those temps.
Stock H80i fans? SP120 silent?

 

Z1NONLY

Distinguished
So Tiger direct was selling refurbished H100's for $50, so I installed one and decided to push my OC.

4.7 is doable but it needs >1.4v to get it stable and then my temps start creeping past the mid 70's with ITBT. (Even with the H100)

4.5 seems comfy:


Name: Z1NONLY
CPU: i72600k
Motherboard: Asus P8 Z77 -Vpro
CPU Voltage: 1.360 (peak)
CPU Bus Speed/Multiplier: 100*45
Clock Speed:4.5Ghz
RAM: Corsair XMS 1333mhz DDR3 9-9-9-24-2T, 1.5v, 32Gb
Cooling: Corsair H100
OS: Windows 7 Home Professional 64 Bit
CPU-Z Validation:http://valid.canardpc.com/igtvgs



 

16bit

Honorable
Oct 6, 2013
238
0
10,710
Name: 16Bit
CPU: 4670k
Motherboard: ASUS Maximus VI Hero
CPU Voltage: 1.300v in Bios
CPU Bus Speed/Multiplier: 100x
Clock Speed: 47x
Cache speed: 40x
RAM: Mushkin Enhanced Blackline @ 1866 10-12-12-28
Cooling: Corsair H110
OS: Windows 8
CPU-Z Validation: http://valid.canardpc.com/6qfxep

2ynktu9.jpg

Didn't know if I should to Intel burn test on standard or high because their was no medium setting so I did Both.
35jcdnl.png
 

chikhar

Honorable
Aug 6, 2013
67
0
10,660


Yup, Stock
 

chikhar

Honorable
Aug 6, 2013
67
0
10,660


Beautifully said Justin. I couldn't agree with you more.
 
Thought I may as well post mine up while we wait to see the fate of this club :)

Go easy on me if I mess anything up, I'm fairly new to overclocking and a newly registered Tom's user. First of all here's my set-up:

Name: DONUT-PC
CPU: i5 3570k
Motherboard: ASRock Z77 Pro 3
CPU Voltage: 1.12
CPU Bus Speed/Multiplier: 100*44
Clock Speed: 4.4ghz
RAM: CORSAIR VENGEANCE 4x4GB 9-9-9-24
Cooling: Xigmatek Dark Knight Night Hawk Frostbourne Edition
OS:Windows 7 Pro 64 Bit
CPU-Z Validation: http://valid.canardpc.com/37gv5y

I'll post my IBT and Real Temp screenies in a few minutes.

Here they are

1SQUaZ3.jpg


TICSlIA.jpg


The first one is from run 9 of the IBT just to show temps and voltage during the test itself. Hopefully that will do :)
 
@AdmiralDonut

ASRock loves to undercut the 100mhz base clock, even though it reads 100mhz in the BIOS it is reported lower to CPU-Z, try setting your base clock to 100.1 in the BIOS just one bump up and you will show a full 4.4ghz on the output end.

 


Done and done! Thanks for the pointer :)
 
Hey guys. I wanna OC my i5 4670k. My CPU cooler is an H100i with two SP120 high's in PUSH so cooling should not be a problem


Questions: How do I OC? I know a bit, But not too much. My motherboard is an MSI Z87 GD65.

If I find a stable overclock but I want more, by how much do I raise the voltage?

What software do I need to make sure its stable? I have Cinebench, HW monitor, CPU Z,Heaven benchmark, OCCT, PRime 95,Valley benchmark, Intel burn test and a few more. Which of those will I need and when do I use each one?


Thanks!
 

jed

Distinguished
May 21, 2004
314
0
18,780
Name: jed
CPU: i7-3960X
Motherboard: Asus Rampage Extreme iv 2011
CPU Voltage: 1.45V
CPU Bus Speed/Multiplier: 100*48
Clock Speed: 4.8ghz
RAM: 16Gb Patriot Viper 2400mhz DDR3 11-13-13-3T
Cooling: Custom Watercooling Loop
OS:Windows 8.1 Pro 64 Bit

http://valid.canardpc.com/f4kk5w



also done on maximum settings as well.



Just finished a 5Ghz run with my 6 core.

 
Hi all, Novuake and I are going to get everything running up really soon. We are in the process of coordinating with each other and figuring out when each of us can work on the club!

Here are somethings we are planning on doing:
Google Form (You fill it out and submit it, then post an image into the thread for verification)
OC Competitions? (We have not figured this out)
 

schmuckley

Distinguished
BANNED
Jul 18, 2011
809
5
19,165

Freeze it!
 
Leung Kenneth and chikhar.

We need validation screenshot from you please.

"Stable OC rules

Take a screenshot of CPU-Z next to a running stress testing program (EX: 10 runs of Intel Burn In on medium)
Posts without a CPU-Z Validation next to a stress testing program to verify stability will not be added, but they will be added to the Unstable/Insane Overclocking section. "
 
Right so list updated. We are still working on an alternate method of submitting which should make things simpler.

Also, if I missed anyone. PLEASE let me know via PM with a link to your submission to make things simpler.

EDIT : LOL left myself out... Dag nabit.
 

leeb2013

Honorable


I also have 2133 memory, but found the I5 much easier to o/c reducing the memory to 1600, hit 4.8GHz.

 

jnewegger23

Distinguished
Glad to see this back up and running again! Much thanks @Novuake and @amuffin! I know it can be much more work than some may envision but it is very much appreciated probably more than you guys realize. Again much THANKS!!!