So i bought a laptop and realized that the 256Gb of storage it came with is too small for my needs. I decided to buy a 1TB M.2 NVME ssd because i knew that there is one more m.2 slot that i can use. Turns out, the new drive wiggles around in that slot. Its not much, but enough for it to not show up in the bios. Same happens when I tighten the screw. So i decided to use the other slot for this drive, the only difference being that it does not have a standoff for a long drive. As i could not think of any other solutions, it is now just sitting there, withouth a screw and is being held in place by my laptops backplate. Any other solutions would be arecippated.
Laptop - (Lenovo ideapad 3 15')
SSD - Kingston A2000 1TB
( https://ibb.co/VNgYhg9 ) Green shows where the drive should be, and red - where it is.
Laptop - (Lenovo ideapad 3 15')
SSD - Kingston A2000 1TB
( https://ibb.co/VNgYhg9 ) Green shows where the drive should be, and red - where it is.