I need to ask something about PWM control really quick. I am trying to change stock fans in my case and may get a new cpu cooler.
I was looking at some really good fans to put in my case to replace fans and also add to the case in the spots that need them.
http://www.directron.com/fnpx1215.html
http://www.directron.com/af12pwm.html
http://www.svc.com/cl2120p.html
and maybe http://www.mwave.com/mwave/SKUSear [...] 20with%204 (maybe the two front fans just in case they die out or something never know... but I like the blue leds and the stuff they have anyway, replacing two blue leds at the side of the case as it is >.< ).
Then there is this http://www.frozencpu.com/products/ [...] 03-45.html
There won't be any problems with the artic cooling fans and pwm control with using the gelid fans and what ever other fan I put in my case right?
I was thinking of getting two akasa flexa 5 way splitters, one for the cpu fan header and one for another four pin fan header located near the sata ports for other fans that may need pwm control (I heard it is not smart to put a lot of stuff on a single fan header, is that correct?) i may only have 3-4 fans on the cpu fan header never know... just to be safe or something lol.
I may not even need two of those if things go to plan, yeah and my case is mainly going to be air built. not to long ago this weekend I ordered the CM 212+ Evo Revision 2, thinking of grabbing some prolimitech pk1 to go with it ( my older thermal paste is missing supposedly donno how though).
I wonder what I am going to do with my CPU if I am going to overclock or not, I may not even have need to even try it. But i hear that heat sink is a beast for it's price, only if it was a silver arrow. I'll probably get one of those or a phanteks later on though.
I heard Sa can get near 16 degrees Celsius at idle or some such, do not know what is the difference between the phanteks and it but phanteks seems to be better for some reason it it may have to do with the degree difference?
I was looking at some really good fans to put in my case to replace fans and also add to the case in the spots that need them.
http://www.directron.com/fnpx1215.html
http://www.directron.com/af12pwm.html
http://www.svc.com/cl2120p.html
and maybe http://www.mwave.com/mwave/SKUSear [...] 20with%204 (maybe the two front fans just in case they die out or something never know... but I like the blue leds and the stuff they have anyway, replacing two blue leds at the side of the case as it is >.< ).
Then there is this http://www.frozencpu.com/products/ [...] 03-45.html
There won't be any problems with the artic cooling fans and pwm control with using the gelid fans and what ever other fan I put in my case right?
I was thinking of getting two akasa flexa 5 way splitters, one for the cpu fan header and one for another four pin fan header located near the sata ports for other fans that may need pwm control (I heard it is not smart to put a lot of stuff on a single fan header, is that correct?) i may only have 3-4 fans on the cpu fan header never know... just to be safe or something lol.
I may not even need two of those if things go to plan, yeah and my case is mainly going to be air built. not to long ago this weekend I ordered the CM 212+ Evo Revision 2, thinking of grabbing some prolimitech pk1 to go with it ( my older thermal paste is missing supposedly donno how though).
I wonder what I am going to do with my CPU if I am going to overclock or not, I may not even have need to even try it. But i hear that heat sink is a beast for it's price, only if it was a silver arrow. I'll probably get one of those or a phanteks later on though.
I heard Sa can get near 16 degrees Celsius at idle or some such, do not know what is the difference between the phanteks and it but phanteks seems to be better for some reason it it may have to do with the degree difference?