Question "No device found AHCI BIOS not installed" but pc still boots to windows 10

[Big_Fhungus]

Hello, i heard that switching my ssd mode from IDE to AHCI mode in the bios would make it run faster. So i changed the setting to ahci and everything works fine but on boot i get the "No device found AHCI BIOS not installed", then my pc proceeds to boot to windows 10 and everything works fine, i swapped back to IDE mode for now, please help me get AHCI mode working on my PC

Here are my specs:
MOBO: Gigabyte x58a-ud3r
RAM: 5x2gb vcolor 1600mhz
GPU: RX550
SSD: Samsung 860 EVO
CPU: Core i7 950

 

[rgd1101]

you need to reinstall windows.

 

[Big_Fhungus]

are you sure there there arent any alternatives. I really dont want to have to reinstall windows!

 

[Bob.B]

Hello, i heard that switching my ssd mode from IDE to AHCI mode in the bios would make it run faster. So i changed the setting to ahci and everything works fine but on boot i get the "No device found AHCI BIOS not installed", then my pc proceeds to boot to windows 10 and everything works fine, i swapped back to IDE mode for now, please help me get AHCI mode working on my PC

Here are my specs:
MOBO: Gigabyte x58a-ud3r
RAM: 5x2gb vcolor 1600mhz
GPU: RX550
SSD: Samsung 860 EVO
CPU: Core i7 950

Try this.

https://www.askvg.com/how-to-change-sata-hard-disk-mode-from-ide-to-ahci-raid-in-bios-after-installing-windows/

Scan down to ........alternative method.

 

[Big_Fhungus]

Try this.

https://www.askvg.com/how-to-change-sata-hard-disk-mode-from-ide-to-ahci-raid-in-bios-after-installing-windows/

Scan down to ........alternative method.

Thanks Bob for the suggestion but i tried the main and alternative method and still no luck, any ideas.

 

[Bob.B]

Thanks Bob for the suggestion but i tried the main and alternative method and still no luck, any ideas.

Just for yuks.
If using a sata2 port try sata3.
If using a sata3 port try sata2.

Some reading.
https://www.google.com/search?hl=en...EBMZgBAKABAqABAaoBB2d3cy13aXo&sclient=gws-wiz

 

[Big_Fhungus]

Just for yuks.
If using a sata2 port try sata3.
If using a sata3 port try sata2.

Some reading.
https://www.google.com/search?hl=en...EBMZgBAKABAqABAaoBB2d3cy13aXo&sclient=gws-wiz

still not working, thank you so much for trying to help me out.