HI i have been trying like crazy to get my cards to run in crossfireX i have just bought a new system that is as follows
ASUS Crosshair V Formula AM3+ DDR3 ATX AMD 990FX 4PCI-E16 1PCI CrossFireX 6 SATA 6GB/S Motherboard
2 xfx hd radeons 7770 1gb w/ 4.95ghz of ddr5 memory
amd bulldozer 8 core
1000w cosair PSU
16gb of gskill ddr3 @ 2140mhz or something like that but tuned down to 1600mhz
I have tried changing the slots of the cards but the mobo manual says to use slot 1 and 3 to achieve 16x native to both cards and in my bios it show that both cards are running at that speed and i have the bridge on the card seated firmly, but in CCC or Vision control center it shows enable crossfirex grayed out and give the following error The AMD CrossFireX internal bridge interconnects linking your graphics cards together are not properly attached. Both bridge interconnects must be attached. For more information, see the user's guide for your graphics card
PLZZ HELP!!!!!!!!!!!!!!
ASUS Crosshair V Formula AM3+ DDR3 ATX AMD 990FX 4PCI-E16 1PCI CrossFireX 6 SATA 6GB/S Motherboard
2 xfx hd radeons 7770 1gb w/ 4.95ghz of ddr5 memory
amd bulldozer 8 core
1000w cosair PSU
16gb of gskill ddr3 @ 2140mhz or something like that but tuned down to 1600mhz
I have tried changing the slots of the cards but the mobo manual says to use slot 1 and 3 to achieve 16x native to both cards and in my bios it show that both cards are running at that speed and i have the bridge on the card seated firmly, but in CCC or Vision control center it shows enable crossfirex grayed out and give the following error The AMD CrossFireX internal bridge interconnects linking your graphics cards together are not properly attached. Both bridge interconnects must be attached. For more information, see the user's guide for your graphics card
PLZZ HELP!!!!!!!!!!!!!!