Question The fans are working but RGB LEDs aren't working.

[ktox000]

Hi, I'm new here and I have a problem. The fans are working but the RGB isn't working, none of them, including the liquid cooler fans. My dad's friend set this PC for me and I don't know much about hardware and stuff so I hope you guys can help me with it. The RGB is working for like 0.1 second when i start the computer and that's all. The unconnected cable that is in 5th photo is connected to the ARGB that is on the upper right. And the other unconnected cable that is in 3th photo is also connected to the ARGB that is on lower left. My english is bad, so sorry if I'm confusing you but I really want to fix this. The motherboard is ASUS prime H610M-K D4 ARGB and uhh idk the box thing is (???) xigmatek lux G and the liquid cooler is MSI coreliquid 240R V2

Here is some pictures of the mother board, the cables and etc. Someone adviced me to tape the open cables so i did but these are the pictures from before of it.

 

[Lutfij]

Welcome to the forums, newcomer!

No offence, but if the system was built by your friend, you should bug him first off all. That rats nest of cables at the bottom of the case is the first that that will overwhelm any novice such as yourself and it's possible you could fry a component or the entire motherboard in your build.

Before you start touching wires, you should first see if Asus's Armory Crate app is installed and if the ARGB lightning option is turned off or if they're all set to 0,0,0,1.

 

[ktox000]

Welcome to the forums, newcomer!

No offence, but if the system was built by your friend, you should bug him first off all. That rats nest of cables at the bottom of the case is the first that that will overwhelm any novice such as yourself and it's possible you could fry a component or the entire motherboard in your build.

Before you start touching wires, you should first see if Asus's Armory Crate app is installed and if the ARGB lightning option is turned off or if they're all set to 0,0,0,1.

Thank you for your kind comment, ı really appreciate it. It wasn't my friend who set this system, it was my dad's friend so i have to send my pc back if I want this lights to work. Someone who I asked this question said that I should tape the open cables with an electric band, so I did it. And yes, Asus armory crate app is installed. But I have no idea how to do the thing you said because I coulnd't find the option you said. I'll keep looking, thank you for the advice <33333

 

[Lutfij]

While the system is disconnected from the wall, disconnect all ARGB cabling and start fresh, with only the AIO's cabling minus the hub. If the AIO works after a boot, then you can shut down and do the same for the hub but with one fan connected one at a time. Please be advised not to hook up anything while the system is powered up and running.

 

[ktox000]

While the system is disconnected from the wall, disconnect all ARGB cabling and start fresh, with only the AIO's cabling minus the hub. If the AIO works after a boot, then you can shut down and do the same for the hub but with one fan connected one at a time. Please be advised not to hook up anything while the system is powered up and running.

I have no idea about what you are saying since I know nothing about hardware and my English is broken but I'll try my best to solve the situation with your advice. Thank you for the advice, it really is helpful and you can be sure that It will help be a lot.

 

[Hamouz0]

i think you can fix it with https://openrgb.org/index.html and no problem of your bad english , do you mean you speak french .