Recent content by trofeer

I just got a new router/modem through ATT and previously I had this setup and it worked fine although it's been like 2 years and I'm a beginner at network stuff. These are the ports for Call of Duty needed: This is how I have input them: does that look right? I'm still getting Moderate NAT...

I know I may be late, but I was recently following an optimizer that recommended disabling all of these as these settings can control performance (fps) in games such as Warzone which is pretty CPU intensive. Very sledomly I get these blink of an eye 'stutters' in game... my temps are fine...

Will do. Is there anything I need to do AI Suite wise? Will BIOS take precedent over the AI Software or is there a way to disable the fan control there? (Should I remove it entirely?)

Unsure what exactly is going on but I've noticed my case fans and cpu fan (3xNoctua NFA14 Case Fans and Noctua U14S CPU Cooler) all come to a halt while I'm gaming which I've never noticed before.. As I type this, they come to a stop at Idle now too for roughly 60-120s. The only changes I've...

right on thanks! is this a solid generic adjustment that would work with same CPU's? Would hate to get a BSOD, just trying to maintain performance while lowering temps/volts

Any update to this? Glad to know someone else was experiencing something similar

This is my first build and I am running a Z490 ROG Maximus XII Hero (WiFi) with a 10700K which is cooled by a Noctua U14S. I have 2x140mm Noctua A14 fans as intake, and a Noctua A15 (150mm) as exhaust. I have not touched anything in BIOS other than disabling MCE and running XMP I for my 3600CL16...

on GPUz My Hot Spot is touching 86.5C...is that concerning?

I opened PX1 and applied the chainlink at 65% for the fans (in AB it would show 75%, weird). This was applied to both benches. I have not touched the memory clock in my custom Profile.. Stock: Profile1: .925mV @ 1960MHz Profile2: .912mV @ 2022MHz I'm getting Max Board Power Draw of...

(This is a bit overwhelming) I am trying to find out what is the go-to benchmark for GPU performance unless I do need to spend $30 on Steam to use 3DMark's software but in the meantime, I am using SuperPosition by UNIENGINE so hopefully this is OK. I am completely new to this so bare with...

this is what my voltage and current stats are now. i havent done a stress test, my main workload is basically the demand of Warzone on 1440p and streaming. all low graphics settings for high fps. Ignore current temp, the game is minimized...Im peaking around 68C in game with this setup and temp...

no longer working with PX1. Strictly afterburner. I would really like to get my temps a little lower so my fan curve doesnt shoot to 85% while gaming. Is it really as simple as grabbing one of the points on the voltage graphs (875mV-900mV for example) and pinning it to about 1950MHz?

System is primarily for gaming/streaming. I would like to know if I need to even adjust anything to achieve the goals that I want (if reasonable). I am looking to slightly lower the temps of my 10700K while maintaining performance OR improve performance while maintaining or even lower temps - I...

Closed PX1. Made a quick sloppy fan curve. Hit Apply. Hit Save, clicked on a profile. HWmonitor shows 680RPM for Fan#1,#2 (Card has 3 fans obvi) but that doesnt really match the % in my curve (shown). Does this look about right?

I want to set a custom fan curve and I thought I already did that, I dont want auto. I was just surprised they didnt even come on automatically when I initially installed it yesterday. Played a game of Warzone and it shot to 88C. I should not have to manually set the Fan speed to a certain %...