motherboard gigabyte

I purchased a gigabyte h97 d3h v1.0 nine years ago. Yesterday, my pc get stuck loading windows so I thought my windows version is the cause of that problem so after waiting 20 minutes the system worked , but when I opened task manager I saw a 100% hdd disk usage all the time for one of my main 4...

BACK STORY: So I tried to plug in an old HDD as an additional hard drive, with the one I’m using right now, that’s been sitting around for a few months to see if it still worked but I saw that when I booted my PC it asked me for a pin that I kept when I worked on it and of course I didn’t...

Hi everyone, approx. 6 years ago I bought a computer that I needed for graphic design and 3D design. I didn't know anything about computers back then, I just told which programs I use and they build me a (gaming) computer and it worked perfectly. The only thing I had to replace last year was...

So i recently build a new pc Motherboard B560m ds3h v2 All the components are fine mounted well double checked all of them But motherboard wont turn kn The problem im thinking is the front panel wiring/pinout Because some of my wires for it dont have the same name/names as in the manual My audio...

Hello. Sorry for my English. 1. I have an i5 10400 Q0 processor with integrated graphics. It is the 10th generation. Will all the m2 slots on the motherboard below work with this processor (the motherboard was designed for 11th gen processors but works with the 10th as well, according to the...

My specs are as follows CPU - i5 4460 Motherboard - Gigabyte B85M gaming 3 RAM - 12 GB DDR3 1333MHz (8+4) PSU - Corsair VS 650w GPU - Zotac 1060 6gb mini When I put a GPU in the motherboard and take display output from it, the GPU fan speed ramps upto 100% and display signal is gone and this...

My machine randomly shuts off. When restarted by me, it fails to boot, and cannot find the windows boot manager. My Windows boot manager is installed on a XPG M.2 2280 GAMMIX 256 GB M.2 NVMe SSD. When I enter the BIOS manually, the BIOS fails to recognise the NVMe SSD. There is one more SATA SSD...

so it happen last week and still haven't gotten repair cuz of covid, my only question is which one is dead the motherboard or the psu. When i plug my psu to the outlet the light of keyboard and mouse are showing up but the computer wont boot, I even jumpstart the motherboard but it dint do...

I recently purchased a Gigabyte B450m DS3H motherboard and AMD Ryzen 5 2600 to upgrade from my 2015 pre-built. Upon install, my computer turned on fine. I used the packaged BIOS driver disk to install the drivers, during which a computer restart was required. The computer shut down, but did not...

Out of nowhere, my GTX 1050ti suddenly stopped working (as in it would give off a black screen after BIOS icons). I have an i5-7600k, 8gb of ram, Gigabyte Gaming B8 mobo, and a 650w EVGA psu. I went to see if it was the monitor = monitor was not at fault. I purchased a new GPU (GTX 1070) =...

Hey all, 7-10 minutes after boot the motherboard drop down everything, my monitors, speakers, keyboard and mouse are shutting down, but the computer is still running. After this i've tried to re-plug every cable, but that is not working. I've got a dual boot system with Kubuntu and Windows 10...

i brought a system that has a cpu of Intel i9-9900K 3.6GHz and a gpu of NVIDIA GeForce RTX 2070 Super 8G also a 1TB SSD, along with two stick of 16GB DDR4 and the os is Windows 10 Home 64-bit and i also brought ram: 4 stick 16gb each 3000mhz brand corsair and name vengernce lpx ddr4 ram part...

I want to upgrade my vga. My vga now is GT 430. My PSU is 530 watt. Can i upgrade it to GT 1030?

Hi all, I use a CORSAIR Hydro Series H60 AIO Liquid CPU Cooler. And i was wondering on which motherboard ports i should connect the pump and fan of this Liquid cooler? Here are the possibilities : CPU_FAN CPU_OPT SYS_FAN1 SYS_FAN2 SYS_FAN3_PUMP ( this port is way to far down on my...