z590

Hello, Just noticed my GPU is only running @ PCI 4.0 x8 instead of x16. I don't have m2 installed on gen4 pci slot. Also my PCI x16 Max Speed is stuck at x8 in the BIOS. I tried the most common solutions found on internet, such as removing and reseating the GPU and changing my ssd slot, but...

So today I finally upgraded from my I7 3770 to an I7 11700K (I know finally), and I put the computer together well and BIOS loads fine, but I have one small issue. I still like running windows 7 over 10 because of the layout and simplicity in the menus, but now that I go to an 11th gen intel...

Hi everyone! I'm facing quite a bizarre issue with an Intel 11th gen platform I've build some time ago for my dad. The build initially consisted of: Intel Core i5 11600k CPU (no OC so far - all settings are left stock) Gigabyte Z590 UD AC Motherboard Crucial 16GB (2x8GB) 3000MHz CL15 Ballistix...

Hello everyone, I was leaning towards pairing an i9-11900k with the Gigabyte Z590 Aorus Pro AX (rev. 1.0). However, I realized that part of the VRM of the motherboard is not covered by the heatsink, as seen in the picture attached( image ). Will it be a problem when it comes to temperatures...

Hi guys, recently i got an i5 11400f on a sale with a Z590 Gaming X from gigabyte for 1130PLN which was a really good price. I fully "unlocked" it and its drawing 155W. The stock cooler is just fine, going up to 75C on a 30min cinebench benchmark but its loud AF even when im doing anything and...

Just built a PC and it isn't fully turning on. My case fans are not spinning, my RAM RGB LEDs are not on, and I get no display. The motherboard RGB lights turn on and the EZ debug lights do not indicate an issue. I have to hold the power switch to turn it off and when it turns off it turns...

Hello, I am very new to installing graphic cards in general and my Motherboard is unique in that it has a Display Port in. I have a Gigabyte Z590 Vision D Motherboard and want to install a NVIDIA Quadro m4000 graphics card via PCIE. From my understanding, I need to go from the Display port...

I built new PC (Asus z590 tuf gaming plus wifi + i5 11600K + 32 GB CRUCIAL Ballistix RAM) The system crashes every few hours with bsod (DRIVER POWER STATE FAILURE) Attached mini dump files https://1drv.ms/u/s!AhsddJcTWUdSd9g-Cnd57pcgd3c?e=zK7z0b And screenshot...

The first time I powered on this PC it displayed the POST screen, I was able to boot into BIOS and got Windows 10 installed. Since then it displays a black screen during POST and doesn't display anything until the Windows login screen. If I hit DELETE during the blank screen it does seem to...

I have Core i5-11600K CPU, I want to overclock it to some extent (not extreme overclocking). I want to overclock all core base frequency to 4.50 Ghz. All core turbo speed should be at least 5.0 GHz. I'm interested in following motherboards. (Price in our country listed in USD) Asus TUF Gaming...

In the manual to this ASUS Prime Z590-a motherboard, there is a page dedicated to shared bandwidth on Page XI. What is strange to me is that the PCIEX4 is unspecified. It's clear from the image, charts, and reading the manual that: PCIEX16_1, PCIEX16_2, and PCIEX16_3 share lanes M.2_2 and...

Hi All I've got an i5-10600KF in a Gigabyte Z590 board. I got it a month or two ago and haven't really gotten into looking at Overclocking at all, but I noticed recently that it seems to run pretty hot. At idol, it averages 45 to 50 degrees, and under load, it gets very hot indeed - usually...

I am unable to see the SATA SSD in both my BIOS and when I try to install Window through USB boot drive. Here is what I've tried: Updated BIOS to latest file (F4d 2021/04/16) Changing to all three M.2 slots on my motherboard. My manuals says that all 3 slot are M.2 SATA SSD or M.2 PCIe SSD...

I purchased a used prebuilt from CyberPower in 2018 and have slowly upgraded it over time to a custom build. I play at 1440p/144Hz and play a wide array of games, some more CPU intensive like Rust and R6. Some more GPU intensive like Squad, HLL, and Warzone. Disregarding the old parts, I have...

Hi Guys, I recently upgraded to a new Motherboard and CPU. While expecting this combination to be an upgrade it ends up beeing a huge headache. Constant crashes when putting the system under load is really starting to annoy me. So as my last resort i want to ask you all some advice: Hardware...

So, I'm using this board : MSI Z590-A Pro , pairing it with this memory dual channel kit : Memory Model F4-3600C18D-16GVK When I enabled the XMP, the system wont boot, It would only boot at default 2133mhz. I don't know what to do. Please advise. Thanks.

I am about to start my new build (Intel i9 11th Gen) ordered already but I am killing myself over the motherboard. I really wanted the MSI Godlike but I don't know when it will be available to purchase. I have a budget of around $1000 for the motherboard. Any recommendations on something that I...

So i have preordered the new Z590 Rog Maximus 13 Extreme Glacial and I'm looking at its 5 M.2 ports. Now for context, I'm upgrading from Z97 so I predate m.2s. I know some use the CPU PCI lanes and some use the PCH/Chipset. Now I've looked at the digital manual and can't understand it, Please...

I can't seem to find any official or unofficial documentation on this. The Z590 XIII Hero has 2 8-Pin EPS connections and the manual says you can use either one or both connections, but never says why you would use both. What scenario would you use both? Overclocking? BIOS settings that ignore...

Hello everyone! i recently upgraded my PC (New CPU, Cooling and Mainboard). New Windows also of course. I did a Benchmark test before and after the Upgrade. While still using the same GPU it got way worse. the 2D score went down from 1158 to 269 and the 3D score from 18921 to 11911. (see...

Hi 10 years removed from building PCs. Got a deal $240 deal on a 10850K. I am eager to finally upgrade from my i7-930 but someone recommended I wait for alleged Jan 11 launch of Z590 for future proofing. I truly don't know what to do now. I was set on the Z490 ROG Strix...