[SOLVED] Acer aspire 6930g hdd and ram cover

[Rui Neves]

some plastic around one of the screws of the cover that covers hdd , ram , gpu , etc ... have brokenn , so I have improvised with a larger and bigger screw , is safe to be that way ?

PS: that screw does not seem to do much anyway

https://imgur.com/a/AvHJ10J

View: https://imgur.com/a/AvHJ10J

 

[jay32267]

It would be better to see a pic....but in general...as long everything is isolated like it was before you should be OK.

Basically you don't want any metal touching metal...where it wasn't touching before.

 

[Rui Neves]

It would be better to see a pic....but in general...as long everything is isolated like it was before you should be OK.

Basically you don't want any metal touching metal...where it wasn't touching before.

yeah sorry , here it is some pics about it :

https://imgur.com/a/AvHJ10J

View: https://imgur.com/a/AvHJ10J

 

[jay32267]

I don't see anything wrong in the pic.....however I'm having a little bit of a hard time matching the pic with what you said up top.

 

[Rui Neves]

I don't see anything wrong in the pic.....however I'm having a little bit of a hard time matching the pic with what you said up top.

https://ibb.co/9n9S3KN

20210602-151502 hosted at ImgBB

Image 20210602-151502 hosted in ImgBB

ibb.co

Okay I uplouded that 2 images now , one with the plastic broken an another with where the screw goes

 

[jay32267]

I think I understand now and I think you are totally fine.

 

[Rui Neves]

I think I understand now and I think you are totally fine.

Good to know , thank you

 

[jay32267]

Good to know , thank you

You're welcome.